Left Banner
-
Free PLA Filament
For First Orders
عامل التصفية النشط
-
التوفر:
غير متوفر
-
Composition:
PETG
-
Composition:
PLA
تصنيف بواسطة:
Polymaker
Polymaker PolyLite PETG
- Polymaker PolyLite PETG
- Density 1.25 g/cm3
- Tensile strength 31.9 MPa
- Elongation at break 6.8 %
- Printing Temperature 230˚C - 240˚C
- Bed Temperature 70˚C - 80˚C
CREALITY
Creality CR PETG
- Creality CR PETG Filament
- Excellent stability and moisture resistance
- Transparent and Glossy
- Mutiple colors
- Simple operation & Wide Range Compatibility
- Printing temperature: 230-250℃
- Tensile strength: 49 MPa
Polymaker
Polymaker PolySonic PLA
- Polymaker PolySonic PLA
- High-speed 3D printing filament
- Nozzle Temp 210~230°C
- Bed Temp 30~60°C
- Printing Speed up to 300mm/s
- Density 1.23 g/cm3
- Glass transition temperature 59°C
Polymaker
Polymaker PolyLite PLA
- Polymaker PolyLite PLA Filament
- Density 1.17 g/cm3
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Tensile strength 46.6 ± 0.9 MPa
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- Printing speed 40-60mm/s
Polymaker
Polymaker PolyLite Dual Silk PLA
- PolyLite Dual Silk PLA Filament
- Density 1.17 g/cm3
- Tensile strength 46.6 ± 0.9 MPa
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- printing speed 40-60mm/s
eSUN
eSun Luminous-PLA
- eSun Luminous-PLA
- Stunning luminescent effect in low-light
- Enhancing aesthetics and fun
- Density 1.2g/cm3
- Durability 40%
- Tensile Strength 72MPa
- Elongation at Break 11.8%
- IZOD Impact Strength 5.4kJ/㎡
- Extruder Temp 210-230℃
- Bed Temp 45 – 60°C
eSUN
eSun ePLA-Lite
- eSun ePLA-Lite Filament
- A cost-effective choice
- Excellent printability
- Density 1.23 g/cm3
- Tensile Strength 61.34 MPa
- Elongation 29.92%
- Durability 40%
- Extruder Temperature 190 – 230℃
- Bed temperature 45 – 60°C
- Printing Speed 40 – 100mm/s
CREALITY
Creality Ender-PLA Filament 2KG
- Creality Ender-PLA Filament 2KG
- Density 1.25g/cm³
- Tensile Strength : 33MPa
- Bending Strength : 75MPa
- Impact Strength : 7.33/m
- Priting Temperature 190℃-230℃
- Hotbed Temperature 25°℃ -60℃
- Print Speed 40-80mm/s
eSUN
eSUN ePLA-Magic Dark Twinkling
- eSUN ePLA-Magic Dark Twinkling
- Density 1.21 g/cm3
- Tensile Strength 34.18MPa
- Elongation at Break 4.25%
- Flexural Modulus 3459 MPa
- Printing Temp 190- 220℃
- Bed Temp 45-60°C
- Printing Speed 40 - 300mm/s
English
العربية
