• Creality K2 Plus Combo 3D Printer
• Multi Filament 3D Printing With CFS
•  Apus Direct Drive Extruder​
• Build Volume 350x350x350mm
• Printing Speed Up to 600mm/s
• Max Nozzle Temp 350°C
• Max Bed Temp 120°C
• Ai Pritning Control System
• Fully Automatic Leveling
• Actively heated chamber
• Conectivity RJ45 ethernet, Wifi

• Fully enclosed chamber for stable printing
• Quad independent toolheads (4 nozzles)
• Up to 500% faster print performance
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera remote monitoring
• WiFi, LAN & USB connectivity

• Quad independent toolheads (4 nozzles)
• Up to 500% faster printing speed
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera for monitoring
• WiFi, LAN & USB connectivity
• PEI flexible steel build plate
• Supports engineering-grade filaments

• طباعة ذكية بأربعة ألوان
• سرعة قصوى ‎600 mm/s‎
• تسارع يصل إلى ‎20000 mm/s²‎
• تبديل تلقائي للخيوط
• استئناف الطباعة بنسبة ‎99%‎
• فوهة سريعة الفك
• خيارات فوهة ‎0.25–0.8 mm‎
• هيكل حركة Core XY ثابت
• دعم مواد طباعة متعددة
• شاشة لمس ‎4.3‎ بوصة
• حجم بناء ‎220×220×220 mm‎
• حرارة منصة حتى ‎110°C‎
• اتصال WiFi وEthernet وUSB
• دعم Prusa/Cura/Orca
• تصميم مدمج ‎363×363×413 mm‎

• Anycubic Kobra 3 MAX
• With Multi Filament 3D Priting Anycubic Ace Pro
• Max Print Volume 425*425*500mm
• Max Priting Speed 600mm/s
• Max Nozzle Temp 300℃
• Max Bed Temp 110℃
• Vibration Compensation System

• Creality Ender-5 Max 3D Printer
• Enormous 400×400×400mm Build volume
• Ultra Fast Printing 700 mm/s
• die-cast aluminum alloy frame
• 36-point auto leveling
• Printing Accuracy 100±0.1 mm
• Layer Height 0.05-0.3 mm
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃

• مسمار كروي صناعي لحركة مستقرة جداً
• يدعم راتنجات عالية اللزوجة حتى 8000 cps
• تقنية Wave Release تقلل قوة السحب 60%
• منصة فولاذية بدقة أقل من 80 ميكرون
• محاذاة LCD بدقة أقل من 70 ميكرون
• نظام LighTurbo 4.0 بانحراف أقل من 2°
• تجانس ضوئي يتجاوز نسبة 92%
• طباعة ثنائية المادة عبر عدة اختيارية
• التحكم بحرارة الراتنج حتى 40°C
• نظام التسوية الذكي 3.0
• نظام Dynamic Release 3.0
• تعويض Light-Off لتحكم أدق
• فيلم NFEP لمعالجة ضوئية ثابتة
• مراقبة عن بُعد عبر كاميرا مدمجة
• تقطيع بنقرة واحدة عبر Workshop 4.0

• Anycubic Kobra S1 Combo
• Print Volume 250*250*250mm
• Printing Speed up to 600mm/s
• 8 Color 3D Printing
• Ultra-Quiet Printing 33dB
• Compatible with PLA, PETG, TPU，ABS, ASA
• Nozzle temperature 320°C
• Hotbed temperature 120℃ 

• Anycubic Photon Mono M7 Max
• Resin Auto-Fill Unit
• Build Volume 298x164x300mm
• 13.6 inch monochrome 7K screen
• X/Y Axis Resolution 46*46μm
• LighTurbo 3.0 High-Precision Light Source System
• Maximum print speed op to 86mm/h
• Dynamic temperature control resin vat
• Intelligence Assisted Printing System
• Light Source COB light source+ Fresnel lens
• Light Intensity 4500±10%μW/cm²

• Creality K1C 3D Printer
• 600mm/s Printing Speed
• Versatile Ai LiDAR
• Priting Dimention : 220*220*250mm
• Maximum Hotend Temp  300℃
• Maximum HotBed Temp  100℃
• Equipted to Ai Camera
• equipped to Air Purifier

• Creality Ender-3 V3 KE 3D Printer
• Build Volume 220*220*240mm
• Max Printing Speed 500mm/s
• Max Nozzle Temp 300
• Max Bed Temp 100
• 4.3" Color Touch Screen Controller
• Layer Thickness 0.1-0.35mm

• حجم طباعة ضخم 350×350×350 مم³
• نظام CoreXY مغلق بالكامل عالي السرعة
• تسخين فعّال للغرفة حتى 65 درجة مئوية
• فوهة فولاذية مقسّاة بدرجة حرارة 350°C
• يدعم الطباعة متعددة الألوان حتى 16 لونًا
• نظام ACE 2 Pro للتجفيف وإعادة التعبئة التلقائية
• يدعم خامات PLA وABS وASA وPC وPA-CF وغيرها
• سرعة طباعة قصوى 600 مم/ث وتسارع 20000 مم/ث²
• معايرة الضغط وتدفق الخامة بدقة عالية
• فلتر هواء بالكربون النشط لتنقية الانبعاثات
• شاشة لمس سعوية مقاس 4.3 بوصة سهلة الاستخدام
• اكتشاف ذكي لتشابك الخيوط وتجاوز الأجسام
• كاميرا 720p للمراقبة والتصوير الزمني
• اتصال متطور Wi-Fi 6 / LAN / USB
• استئناف الطباعة بعد انقطاع التيار وحساس الخامة

• Creality K2 Plus 3D Printer
• Build Volume 350x350x350mm
• Printing Speed Up to 600mm/s
• Max Nozzle Temp 350°C
• Max Bed Temp 120°C
• Ai Pritning Control System
• Printing Accuracy 100mm±0.1mm
• Extruder Apus dual-gear direct drive extruder
• Fully Automatic Leveling
• Actively heated chamber
• Conectivity RJ45 ethernet, Wifi

• Anycubic Kobra 3 Combo
• With Multi Filament 3D Priting Anycubic Ace Pro
• Max Print Volume 250*250*260mm
• Max Priting Speed 600mm/s
• Max Nozzle Temp 300℃
• Max Bed Temp 100℃

• 10.1-inch 14K Mono LCD
• ACF Release Film
• LED matrix UV light source
• Print Speed Up to 105mm/h
• XY Resolution of 16.8*24.8μm
• Wi-Fi Transfer Speeds of 6-10Mbps
• Build Volume of 200x223.78x126.38 mm³
• 4.3-inch Capacitive Touch Screen Controller
• Equipped to Air Heater & Purifier

• CREALITY Ender-3 V3 3D Printer
• Build Volume 220*220*250mm
• Print Speed Up to 600 mm/s
• Hotend Max Temp 300 °C
• Build Plate Max Temp 110 °C
• Automatic Levelling
• 4.3" Touch Screen Controller
• Klipper Frimware
• Layer Height 0.1-0.35mm

• CREALITY Sermoon D3
• Build Volume 300*250*300mm
• Print Speed Up to 250 mm/s
• Hotend Max Temp 300 °C
• Build Plate Max Temp 110 °C
• Automatic Levelling With CR-Touch Sensor
• 4.3" Removable Touch Screen Controller
• Layer Height 0.1-0.4mm

• Anycubic Kobra 2 Max 3D Printer
• Build Volume 420*420*500mm
• Print Speed Up to 500 mm/s
• Hotend Max Temp 260 °C
• Build Plate Max Temp 90 °C
• Anycubic LeviQ 2.0 Automatic Leveling 49 Points
• 4.3" Removable Touch Screen Controller
• PEl Magnetic Spring Steel Printing bed

• Anycubic Kobra 2 Pro 3D printer
• Maximum Print 250*220*220mm
• Max Speed 500mm/s
• Automatic Leveling LeviQ 2.0
• Max Hotend Temp 260°C
• Max Bed Temp 110°C
• Super Quick 7000rpm/min Cooling fan
• 4.3" LCD Touch-Control Screen

• Anycubic Kobra 2 Plus 3D printer
• Maximum Print 400x320x320mm
• Max Speed 500mm/s
• Automatic Leveling LeviQ 2.0
• Max Hotend Temp 260°C
• Max Bed Temp 90°C
• Super Quick 7000rpm/min Cooling fan
• 4.3" LCD Touch-Control Screen

• 10.3-inch 8K mono LCD
• FEP Release Film
• Integral Light Source 3.0
• Print Speed 1~5 Layer/s
• XY Resolution of 29.7um
• Build Volume of 228x128x230 mm³
• 4.3-inch Capacitive Touch Screen Controller

• Anycubic Photon Mono M5s Resin 3D Printer
• 10.1" monochrome LCD 12K
• Maximum Print Dimmention 200x218x123mm
• Leveling-free Printing Plate
• 4.3" TFT touch-controller
• Light Source LED matrix UV light
• XY Resolution 19*24nm
• Resin Status Detection Sensor

• CREALITY CR-M4 3D Printer
• Build Volume 450*450*470mm
• Print Speed Up to 120 mm/s
• Hotend Max Temp 300 °C
• Build Plate Max Temp 100 °C
• Automatic Levelling 25-point
• 4.3" Removable Touch Screen Controller
• Layer Height 0.05-0.35mm

• FlashForge Creator 3 Pro Dual Extruder 3D Printer
• Build Volume 300x250x200mm
• Print Speed 10-150mm/s
• Max Extruder Temperature 320℃
• Max Bed Temperature 120℃
• 4.3-inch Touch Screen Controller
• Independent Dual Extruders

• CREALITY Sermoon D3 PRO
• Dual Extrusion System
• Build Volume 300*250*300mm
• Print Speed Up to 250 mm/s
• Hotend Max Temp 300 °C
• Build Plate Max Temp 110 °C
• Automatic Levelling With CR-Touch Sensor
• 4.3" Removable Touch Screen Controller
• Layer Height 0.1-0.4mm

• Creality Ender-3 V3 SE 3D Printer
• Build Volume:220*220*250mm
• Max Printing Speed:250mm/s
• Max Nozzle Temperature 260℃
• Max Heatbed Temperature:≤100℃
• Printing Accuracy:±0.1mm
• 3.2'' Color Knob Screen Controller

• Anycubic Kobra 2 Neo 3D Printer
• Printing Volume 250*220*220mm
• Max Printing Speed 250mm/s
• Automatic Bed Leveling LeviQ 2.0 25 Points
• Max Nozzle Temp 260°C 
• Max Bed Temp 110°C
• 2.4" LCD Knob-Control

• Creality Ender-5 S1 3D Printer
• Build Volume 220*220*280mm
• Printing Speed 250mm/s
• Max Nozzle Temp 300℃
• Max Bed Temp 110℃
• CR Touch auto-leveling
• 4.3" Touch Screen Controller
• Printing Accuracy ±0.1mm

• Creality Ender-3 S1 Pro 3D Printer
• Build Volume 220*220*270mm
• Max Printing Speed 160mm/s
• Max Nozzle Temp 300°C
• Max Bed Temp 110°C
• Layer Thickness 0.1-0.35mm
• Printing Precision 0.1mm
• CR Touch Auto Bed Leveling

• Creality CR-10 SE 3D Printer
• Build Volume 220*220*625mm
• Priting Speed 600mm/s
• Max Nozzle Temp 300°C
• Max Bed Temp 110°C
• 4.3 Touch Screen Controller
• Layer Thickness 0.1~0.35mm
• Auto Bed Leveling With CR Touch Sensor
• Hardened steel nozzle

• Creality HALOT-MAGE S 14K Resin 3D Printer
• 10.1" LCD with 14K Resolution
• Dynax+ Mode for 150mm/h Speed
• Build Volume: 223*126*230mm
• Layer Height: 0.05-0.2mm
• Mono LCD Resolution 13320*5120
• XY Resolution: 16.8*24.8μm
• Light Intensity: 3500±10%μW/cm²
• Release Film: FEP
• Integral Light Source 3.0

• Anycubic Kobra 3
• Max Print Volume 250*250*260mm
• Max Priting Speed 600mm/s
• Max Nozzle Temp 300℃
• Max Bed Temp 100℃
• 4.3-inch Touch Controller
• Hardened Steel Extruder Gear
• Automatic hot bed leveling
• Quick Swap Nozzle

• FlashForge Adventurer 5M 3D Printer
• Build Volume 220*220*220mm
• Printing Speed 600mm/s
• Max Extruder Temp 280℃
• Max Bed Temp 110 ℃
• Layer Thickness 0.1-0.4 mm
• Print Precision ±0.2 mm

• Creality K1 SE 3D Printer
• Build Volume 220*220*250mm
• Printing Speed 600mm/s
• Printing Accuracy 100±0.1mm
• Nozzle Temperature ≤300℃
• Heatbed Temperature ≤100℃
• Layer Height 0.1-0.35mm
• 4.3" Touch Screen Controller
• Built in wifi
• Fully Automatic Leveling
• Power Loss Recover
• Slicing Software Creality Print 5.0, Cura, PrusaSlicer

• Anycubic Photon Mono 4 Resin 3D Printer
• 7 Inches 10K Monochrome LCD
• Resolution 9024x5120 Pixel
• Xy resolution 17*17μm
• 2.8" Touch Screen Controller
• Light intensity ~3000μW /cm²
• 4-point manual Printing Plate leveling
• LighTurbo Light Source
• Max Printing Volume 153.4*87*165mm
• Layer height 0.03-0.15mm
• Printing Speed up to 70mm/h

• Anycubic Photon Mono 4 Ultra
• 7 Inches 10K MonoChrome LCD
• XY 17*17μm
• Printing Speed Up to 80-120mm/h
• Priting Volume 153.4*87*165 mm
• COB Light Source
• ACF Release Film
• 4 Point Manual Leveling
• WiFi6 and Lan Connectivity
• 4.3Inch Touch screen controller
• Internal Air Purifier