• Quad independent toolheads (4 nozzles)
• Up to 500% faster printing speed
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera for monitoring
• WiFi, LAN & USB connectivity
• PEI flexible steel build plate
• Supports engineering-grade filaments

• طباعة ذكية بأربعة ألوان
• سرعة قصوى ‎600 mm/s‎
• تسارع يصل إلى ‎20000 mm/s²‎
• تبديل تلقائي للخيوط
• استئناف الطباعة بنسبة ‎99%‎
• فوهة سريعة الفك
• خيارات فوهة ‎0.25–0.8 mm‎
• هيكل حركة Core XY ثابت
• دعم مواد طباعة متعددة
• شاشة لمس ‎4.3‎ بوصة
• حجم بناء ‎220×220×220 mm‎
• حرارة منصة حتى ‎110°C‎
• اتصال WiFi وEthernet وUSB
• دعم Prusa/Cura/Orca
• تصميم مدمج ‎363×363×413 mm‎

• ELEGOO OrangeStorm Giga
• Build Volume 800x800x1000mm
• Printing Speed 300mm/s
• Multi-Nozzle Printing
• Portable 7-inch Controller
• Multi link Printing Plate
• Max Bed Temp 90°C
• Max Extruder Temp 300℃

• ELEGOO Centauri Carbon 3D Printer
• Build Volume 256×256×256 mm
• Fully enclosed chamber
• Max Printing Speed 500 mm/s
• Support Auto-Leveling
• Layer Thickness 0.1-0.4 mm
• 4.3-inch Capacitive Touch Screen Controller
• Max Hot End Temperature 320 °C
• Max Heated Bed Temperature 110 °C

• حجم طباعة كبير 340×320×340 مم
• طباعة متعددة الألوان مع AMS 2 Pro
• دعم حتى 24 لونًا ومواد متعددة
• معايرة بصرية بدقة 5 ميكرومتر
• فوهة معدنية تتحمل حرارة 350°
• حجرة طباعة مُسخنة حتى 65°
• نظام تجفيف أوتوماتيكي للخيوط
• 23 مستشعرًا ذكيًا و 3 كاميرات AI
• سرعة طباعة تصل إلى 1000 مم/ث
• محرك سيرفو بقوة بثق أعلى 67٪
• دعم وحدة ليزر اختيارية بقوة 10 واط
• نظام تعويض الاهتزازات النشط
• هيكل معدني قوي ومتين للغاية
• تشغيل هادئ بمستوى ضوضاء أقل من 50 ديسيبل

• Dual-nozzle system for multi-material & multi-color printing
• Maximum print speed up to 600mm/s
• Massive build volume: 350×320×325 mm³
• High-temperature all-metal hotend: up to 350°C
• 65°C actively heated chamber for warp-free printing
• Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
• REAL High-Flow Hotend: up to 65mm³/s flow rate
• Intelligent DynaSense Extruder with closed-loop servo control
• Automatic multi-color and multi-filament printing
• Supports up to 16 filaments
• 15-point filament monitoring system for feeding, tip location, tension & flow
• AI and Smart Features
• AI-powered pre-flight checklist
• Built-in cameras: BirdsEye, Nozzle, Toolhead
• Auto bed leveling and Z-offset calibration
• Real-time error detection (clogs, tangles, under-extrusion)
• Power loss recovery & filament runout detection
• Compatible with optional 10W / 40W laser modules
• Compatible with digital cutting blade module
• Compatible with pen plotter tool for writing/drawing
• Quick-swap toolheads with automatic recognition
• Laser Power: 10W or 40W (455nm)
• Engraving area: up to 310×270 mm
• Engraves and cuts wood, acrylic, leather, rubber, and more
• Micro Lidar for 3D mesh generation and Z-height sensing
• Built-in air assist, flame detection, and safety systems
• Digital Cutting & Drawing
• Cutting area: 300×285 mm²
• Blade pressure: 50gf to 600gf
• Supports vinyl, paper, fabric, leather, etc.

• Bambu Lab A1 Combo 3D printer
• Multi-Color Printing With AMS
• Build Volume:256*256*256 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 100℃
• built-in Monitoring camera

• 12.8-inch 6K mono LCD
• PFA Release Film
• Light Source COB light source
• Print Speed Up to 70mm/H
• XY Resolution of 51*51um
• Build Volume of 277.848*156.264*300 mm³
• 3.5-inch Capacitive Touch Screen Controller

• Large build volume: 302.4 × 161.98 × 300 mm
• 14-inch 16K LCD with 20×26μm XY resolution
• New dual-door design for better accessibility
• Multi-point auto-leveling system for precision
• Quick LCD replacement in just 10 minutes
• Release film replacement in only 10 seconds
• Smart resin feeding and recycling system (2kg tank)
• Heated resin vat for stable printing temperature
• Built-in camera with adaptive lighting and alerts
• Compatible with Elegoo SatelLite slicer software

• ELEGOO Mars 5 Ultra 3D Printer
• 7-inch 9K Mono LCD
• Printing Speed 150mm/h
• Resolution 8520x4320
• XY Resolution 18x18μm
• Smart Printing with AI Camera
• Automatic Build Plate Leveling
• Layer Thickness 0.01-0.2mm
• 9H Screen Protector
• 4.0-inch Capacitive Touch Screen Controller
• Z-AXIS Accuracy 0.02mm
• Real-Time Monitoring

• Bambu Lab X1 Carbon COMBO 3D printer
• Equipped with the AMS System
• Build Volume:256×256×256mm
• High quality printing with 7 μm Lidar Resolution
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• ELEGOO Saturn 4 Ultra Resin 3D Printer
• 10" Mono LCD 12K
• Resolution 11520*5120
• XY Resolution 19*24um
• Build Volume 218.88*122.88*220mm
• Layer Thickness 0.01-0.2mm
• Printing Speed 150mm/H
• Printing Technology : MSLA Stereo lithography
• Light Source COB + Fresnel Collimating Lens
• PFA release film
• 4-inch capacitive touch screen Controller
• Real-Time AI Monitoring And Time
• Automatic Build Plate Leveling

Regular fit, round neckline, short sleeves. Made of extra long staple pima cotton.

• Bambu Lab P1S 3D printer
• Build Volume:256×256×256mm
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• Enclosed-body for high-temperature filament printing
• Up to 16-color printing with AMS
• built-in chamber camera

• Bambu Lab A1 mini 3D printer
• Build Volume:180*180*180 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 80℃
• built-in Monitoring camera

• Bambu Lab P1S 3D printer
• Build Volume:256×256×256mm
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• 10-inch 12K Mono LCD
• ACF Release Film
• Light Source COB+Reflective Light Source
• Print Speed Up to 150mm/h
• Linux OS with 4Gb RAM
• XY Resolution of 19×24μm
• Wi-Fi Transfer Speeds of 6-10Mbps
• Build Volume of 218.88×122.88×260 mm³
• 4.0-inch Capacitive Touch Screen Controller

• 7-inch 9K mono LCD
• ACF Release Film
• Light Source COB light source + Fresnel collimating lens
• Print Speed Up to 150mm/h
• Linux OS with 4Gb RAM
• XY Resolution of 18μm
• Wi-Fi Transfer Speeds of 6-10Mbps
• Build Volume of 153.36x77.76x165 mm³
• 4.0-inch Capacitive Touch Screen Controller

• Elegoo Neptune 4 PRO 3D Printer
• Build Volume 225*225*265mm
• Print Speed Up to 500 mm/s
• Hotend Max Temp 300 °C
• Build Plate Max Temp 110 °C
• Automatic Levelling over 121 Points
• 4.3" Removable Touch Screen Controller
• Klipper Frimware
• Dual-Drive-Gear Extruder

• Prusa MK4 3D Printer 3D Printer
• Build Volume 250x210x220mm
• Print Speed Up to 600 mm/s
• Hotend Max Temp 290 °C
• Build Plate Max Temp 120 °C
• Automatic, Mesh Bed Leveling
• 3.5" Removable Touch Screen Controller
• PEl Magnetic Spring Steel Printing bed

• Bambu Lab X1 Carbon 3D printer
• Build Volume:256×256×256mm
• High quality printing with 7 μm Lidar Resolution
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• Bambu Lab X1E 3D printer
• Build Volume:256×256×256mm
• High quality printing with 7 μm Lidar Resolution
• Max Speed : 500mm/s
• Max Hot End Temperature : 320 ℃
• Chamber Control Temperature 60℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• Bambu Lab A1 mini Combo 3D printer
• Equipped with AMS system
• Build Volume:180*180*180 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 80℃
• built-in Monitoring camera

• Elegoo Neptune 4 Max 3D Printer
• Build Volume 420x420x480mm³
• Print Speed Up to 500 mm/s
• Hotend Max Temp 300 °C
• Build Plate Max Temp 85 °C
• Automatic Levelling over 121 Points
• 4.3" Removable Touch Screen Controller
• Klipper Frimware
• Dual-Drive-Gear Extruder

• Elegoo Saturn 3 12K Resin 3D Printer
• 10-inch 12K Mono LCD
• Build Volume of 218.88×122.88×250 mm³
• XY Resolution of 19×24μm
• Light Source COB + Fresnel Collimating Lens
• 3.5-inch Touch Screen Controller
• Layer Thickness 0.01-0.2mm
• Print Speed 70mm/h 

• Flashforge Adventurer 5M PRO 3D Printer
• Printing Dimension 220*220*220mm
• Printing Speed 600mm/s
• Layer Thickness 0.1-0.4mm
• Max Extruder Temperature 280­°C
• Max Platform Temperature 110­°C
• Printing Precision ±0.1 mm
• 4.3 inch Touch LCD Screen Controller
• Full auto one click leveling

• FlashForge Creator 3 Pro Dual Extruder 3D Printer
• Build Volume 300x250x200mm
• Print Speed 10-150mm/s
• Max Extruder Temperature 320℃
• Max Bed Temperature 120℃
• 4.3-inch Touch Screen Controller
• Independent Dual Extruders

• Elegoo Neptune 4 Plus 3D Printer
• Print Volume 320x320x385mm³
• Max Printing Speed: 500 mm/s
• Max Nozzle Temp 300 °C
• Max Bed Temp 100 °C
• Auto Bed Leveling
• High Speed Klipper Mainboard

• Elegoo Neptune 4 3D Printer
• Build Volume 225x225x265mm³
• Max Printing Speed: 500 mm/s
• Max Nozzle Temp 300 °C
• Max Bed Temp 110 °C
• 121 Points Auto Bed Leveling
• ARM 64-bit high-performance mainboard
• Powerful cooling system

• ELEGOO Mars 4 Max 6K 3D Printer
• 9.1-inch 6K Mono LCD
• Build Volume 195.84x122.4x150mm³
• Layer Thickness 0.01-0.2 mm
• Printing Speed 30-70 mm/h
• 3.5" Touch Screen Controller
• PRINTING TECHNOLOGY MSLA
• Light Source COB light source + refraction
• Internal Air Purifier
•  9H hardness tempered glass LCD Protector

• Elegoo Mars 4 DLP Resin 3D Printer
• Build Volume 132.8x74.7x150mm³
• Printing Speed 30-70 mm/h
• Digital Light Processing System
• +20,000h Lifespan
• Internal Air Purifier
• 3.5-inch Touch Screen Controller

• ELEGOO Saturn 4 Resin 3D Printer
• 10" Mono LCD 12K
• Resolution 11520*5120
• XY Resolution 19*24um
• Build Volume 218.88*122.88*220mm
• Layer Thickness 0.01-0.2mm
• Printing Speed 150mm/H
• Printing Technology : MSLA Stereo lithography
• Light Source COB + Fresnel Collimating Lens
• PFA release film
• 4-inch capacitive touch screen Controller
• Automatic Build Plate Leveling

• FlashForge Adventurer 5M 3D Printer
• Build Volume 220*220*220mm
• Printing Speed 600mm/s
• Max Extruder Temp 280℃
• Max Bed Temp 110 ℃
• Layer Thickness 0.1-0.4 mm
• Print Precision ±0.2 mm