• Creality K2 Plus Combo 3D Printer
• Multi Filament 3D Printing With CFS
•  Apus Direct Drive Extruder​
• Build Volume 350x350x350mm
• Printing Speed Up to 600mm/s
• Max Nozzle Temp 350°C
• Max Bed Temp 120°C
• Ai Pritning Control System
• Fully Automatic Leveling
• Actively heated chamber
• Conectivity RJ45 ethernet, Wifi

• 300×300×300 mm large build volume
• CFS for up to 4-color multi-material printing
• Active air chamber heating system
• Expandable to 16 colors with 4 CFS units
• Equipped with a heated print chamber
• 32GB EMMC File Storage
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy controla

• 260×260×260 mm large build volume
• CFS for up to 4-color multi-material printing
• Expandable to 16 colors with 4 CFS units
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• 260×260×260 mm large build volume
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• 300×300×300 mm large build volume
• Equipped with a heated print chamber
• 32GB EMMC File Storage
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• Quad independent toolheads (4 nozzles)
• Up to 500% faster printing speed
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera for monitoring
• WiFi, LAN & USB connectivity
• PEI flexible steel build plate
• Supports engineering-grade filaments

• طباعة ذكية بأربعة ألوان
• سرعة قصوى ‎600 mm/s‎
• تسارع يصل إلى ‎20000 mm/s²‎
• تبديل تلقائي للخيوط
• استئناف الطباعة بنسبة ‎99%‎
• فوهة سريعة الفك
• خيارات فوهة ‎0.25–0.8 mm‎
• هيكل حركة Core XY ثابت
• دعم مواد طباعة متعددة
• شاشة لمس ‎4.3‎ بوصة
• حجم بناء ‎220×220×220 mm‎
• حرارة منصة حتى ‎110°C‎
• اتصال WiFi وEthernet وUSB
• دعم Prusa/Cura/Orca
• تصميم مدمج ‎363×363×413 mm‎

• Creality Hi Combo 3D Printer
• Support Multicolor 3D Printing
• Build Volume 260×260×300mm
• Printing Speed up to 500mm/s
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃
• Full-auto leveling
• 3.2" color touch screen
• Built-in Sensor to Read Filament Info
• All-metal Body
• Monitoring Camera with a Privacy Cap

• حجم بناء 260 × 260 × 260 مم
• نظام طباعة مدمج بأربعة ألوان
• قابل للتوسعة حتى 19 لونًا
• تقنية الطباعة متعددة الألوان ACE GEN 2
• تقليل هدر تبديل الفتيل بنسبة ‎81.25%‎
• سرعة طباعة افتراضية 300 مم/ث
• سرعة طباعة قصوى 600 مم/ث
• تسارع أقصى 20,000 مم/ث²
• معايرة تلقائية LeviQ 3.0 بـ49 نقطة
• نظام بثق مباشر عالي الدقة
• يدعم PLA وPETG وTPU وASA
• كشف ذكي لأخطاء الطباعة بالذكاء الاصطناعي
• كاميرا 720P للمراقبة المباشرة
• تشغيل هادئ للغاية ≤48 ديسيبل

• Anycubic Kobra 3 MAX
• With Multi Filament 3D Priting Anycubic Ace Pro
• Max Print Volume 425*425*500mm
• Max Priting Speed 600mm/s
• Max Nozzle Temp 300℃
• Max Bed Temp 110℃
• Vibration Compensation System

• Creality Ender-5 Max 3D Printer
• Enormous 400×400×400mm Build volume
• Ultra Fast Printing 700 mm/s
• die-cast aluminum alloy frame
• 36-point auto leveling
• Printing Accuracy 100±0.1 mm
• Layer Height 0.05-0.3 mm
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃

• Creality Ender-5 Max 3D Printer
• Enormous 400×400×400mm Build volume
• Ultra Fast Printing 700 mm/s
• die-cast aluminum alloy frame
• 36-point auto leveling
• Printing Accuracy 100±0.1 mm
• Layer Height 0.05-0.3 mm
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃

• Creality Ender-3 V3 Plus 3D Printer
• Max Printing Volume 300*300*300mm
• Max Printing Speed 600mm/s
• Max Extruder Temp 300°C
• Max Bed Temp 100°C
• Fully Automatic Bed Leveling
• 4.3Inch Touch Screen Controller
• Tough Aerospace Aluminum Alloy
• Quick-swap Nozzle
• Two Powerful Motors on Y-axis
• Automated XZ Belt Tensioning
• Printing Accuracy ±0.2mm

• Creality Hi 3D Printer
• Build Volume 260×260×300mm
• Printing Speed up to 500mm/s
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃
• Full-auto leveling
• 3.2" color touch screen
• Built-in Sensor to Read Filament Info
• All-metal Body
• Monitoring Camera with a Privacy Cap

• حجم طباعة كبير 340×320×340 مم
• طباعة متعددة الألوان مع AMS 2 Pro
• دعم حتى 24 لونًا ومواد متعددة
• معايرة بصرية بدقة 5 ميكرومتر
• فوهة معدنية تتحمل حرارة 350°
• حجرة طباعة مُسخنة حتى 65°
• نظام تجفيف أوتوماتيكي للخيوط
• 23 مستشعرًا ذكيًا و 3 كاميرات AI
• سرعة طباعة تصل إلى 1000 مم/ث
• محرك سيرفو بقوة بثق أعلى 67٪
• دعم وحدة ليزر اختيارية بقوة 10 واط
• نظام تعويض الاهتزازات النشط
• هيكل معدني قوي ومتين للغاية
• تشغيل هادئ بمستوى ضوضاء أقل من 50 ديسيبل

• Dual-nozzle system for multi-material & multi-color printing
• Maximum print speed up to 600mm/s
• Massive build volume: 350×320×325 mm³
• High-temperature all-metal hotend: up to 350°C
• 65°C actively heated chamber for warp-free printing
• Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
• REAL High-Flow Hotend: up to 65mm³/s flow rate
• Intelligent DynaSense Extruder with closed-loop servo control
• Automatic multi-color and multi-filament printing
• Supports up to 16 filaments
• 15-point filament monitoring system for feeding, tip location, tension & flow
• AI and Smart Features
• AI-powered pre-flight checklist
• Built-in cameras: BirdsEye, Nozzle, Toolhead
• Auto bed leveling and Z-offset calibration
• Real-time error detection (clogs, tangles, under-extrusion)
• Power loss recovery & filament runout detection
• Compatible with optional 10W / 40W laser modules
• Compatible with digital cutting blade module
• Compatible with pen plotter tool for writing/drawing
• Quick-swap toolheads with automatic recognition
• Laser Power: 10W or 40W (455nm)
• Engraving area: up to 310×270 mm
• Engraves and cuts wood, acrylic, leather, rubber, and more
• Micro Lidar for 3D mesh generation and Z-height sensing
• Built-in air assist, flame detection, and safety systems
• Digital Cutting & Drawing
• Cutting area: 300×285 mm²
• Blade pressure: 50gf to 600gf
• Supports vinyl, paper, fabric, leather, etc.

• Bambu Lab A1 Combo 3D printer
• Multi-Color Printing With AMS
• Build Volume:256*256*256 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 100℃
• built-in Monitoring camera

• Anycubic Kobra S1 Combo
• Print Volume 250*250*250mm
• Printing Speed up to 600mm/s
• 8 Color 3D Printing
• Ultra-Quiet Printing 33dB
• Compatible with PLA, PETG, TPU，ABS, ASA
• Nozzle temperature 320°C
• Hotbed temperature 120℃ 

• Creality K1C 3D Printer
• 600mm/s Printing Speed
• Versatile Ai LiDAR
• Priting Dimention : 220*220*250mm
• Maximum Hotend Temp  300℃
• Maximum HotBed Temp  100℃
• Equipted to Ai Camera
• equipped to Air Purifier

• Creality K1 Max 3D Printer
• 600mm/s Printing Speed
• Versatile Ai LiDAR
• Priting Dimention : 300*300*300mm
• Maximum Hotend Temp  300℃
• Maximum HotBed Temp  100℃
• Equipted to Ai Camera
• equipped to Air Purifier

• Creality Ender-3 V3 KE 3D Printer
• Build Volume 220*220*240mm
• Max Printing Speed 500mm/s
• Max Nozzle Temp 300
• Max Bed Temp 100
• 4.3" Color Touch Screen Controller
• Layer Thickness 0.1-0.35mm

• حجم طباعة ضخم 350×350×350 مم³
• نظام CoreXY مغلق بالكامل عالي السرعة
• تسخين فعّال للغرفة حتى 65 درجة مئوية
• فوهة فولاذية مقسّاة بدرجة حرارة 350°C
• يدعم الطباعة متعددة الألوان حتى 16 لونًا
• نظام ACE 2 Pro للتجفيف وإعادة التعبئة التلقائية
• يدعم خامات PLA وABS وASA وPC وPA-CF وغيرها
• سرعة طباعة قصوى 600 مم/ث وتسارع 20000 مم/ث²
• معايرة الضغط وتدفق الخامة بدقة عالية
• فلتر هواء بالكربون النشط لتنقية الانبعاثات
• شاشة لمس سعوية مقاس 4.3 بوصة سهلة الاستخدام
• اكتشاف ذكي لتشابك الخيوط وتجاوز الأجسام
• كاميرا 720p للمراقبة والتصوير الزمني
• اتصال متطور Wi-Fi 6 / LAN / USB
• استئناف الطباعة بعد انقطاع التيار وحساس الخامة

• Creality K2 Plus 3D Printer
• Build Volume 350x350x350mm
• Printing Speed Up to 600mm/s
• Max Nozzle Temp 350°C
• Max Bed Temp 120°C
• Ai Pritning Control System
• Printing Accuracy 100mm±0.1mm
• Extruder Apus dual-gear direct drive extruder
• Fully Automatic Leveling
• Actively heated chamber
• Conectivity RJ45 ethernet, Wifi

• Bambu Lab X1 Carbon COMBO 3D printer
• Equipped with the AMS System
• Build Volume:256×256×256mm
• High quality printing with 7 μm Lidar Resolution
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• Anycubic Kobra 3 Combo
• With Multi Filament 3D Priting Anycubic Ace Pro
• Max Print Volume 250*250*260mm
• Max Priting Speed 600mm/s
• Max Nozzle Temp 300℃
• Max Bed Temp 100℃

Regular fit, round neckline, short sleeves. Made of extra long staple pima cotton.

• Bambu Lab P1S 3D printer
• Build Volume:256×256×256mm
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• Enclosed-body for high-temperature filament printing
• Up to 16-color printing with AMS
• built-in chamber camera

• Bambu Lab A1 mini 3D printer
• Build Volume:180*180*180 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 80℃
• built-in Monitoring camera

• Bambu Lab P1S 3D printer
• Build Volume:256×256×256mm
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• CREALITY Ender-3 V3 3D Printer
• Build Volume 220*220*250mm
• Print Speed Up to 600 mm/s
• Hotend Max Temp 300 °C
• Build Plate Max Temp 110 °C
• Automatic Levelling
• 4.3" Touch Screen Controller
• Klipper Frimware
• Layer Height 0.1-0.35mm

• CREALITY Sermoon D3
• Build Volume 300*250*300mm
• Print Speed Up to 250 mm/s
• Hotend Max Temp 300 °C
• Build Plate Max Temp 110 °C
• Automatic Levelling With CR-Touch Sensor
• 4.3" Removable Touch Screen Controller
• Layer Height 0.1-0.4mm

• Anycubic Kobra 2 Max 3D Printer
• Build Volume 420*420*500mm
• Print Speed Up to 500 mm/s
• Hotend Max Temp 260 °C
• Build Plate Max Temp 90 °C
• Anycubic LeviQ 2.0 Automatic Leveling 49 Points
• 4.3" Removable Touch Screen Controller
• PEl Magnetic Spring Steel Printing bed

• Bambu Lab X1 Carbon 3D printer
• Build Volume:256×256×256mm
• High quality printing with 7 μm Lidar Resolution
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• Bambu Lab X1E 3D printer
• Build Volume:256×256×256mm
• High quality printing with 7 μm Lidar Resolution
• Max Speed : 500mm/s
• Max Hot End Temperature : 320 ℃
• Chamber Control Temperature 60℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• Bambu Lab A1 mini Combo 3D printer
• Equipped with AMS system
• Build Volume:180*180*180 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 80℃
• built-in Monitoring camera

• Anycubic Kobra 2 Pro 3D printer
• Maximum Print 250*220*220mm
• Max Speed 500mm/s
• Automatic Leveling LeviQ 2.0
• Max Hotend Temp 260°C
• Max Bed Temp 110°C
• Super Quick 7000rpm/min Cooling fan
• 4.3" LCD Touch-Control Screen