English
العربيةGet Up To 50% OFF New Season Styles, Limited Time Only.
Left Banner
منتجات جديدة
منتجات جديدة
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
وصل حديثاً
عامل التصفية النشط
- جديد
- غير متوفر حالياً
AESUB
AESUB Transparent 3D Scanning Spray
- AESUB Transparent 3D Scanning Spray
- Layer thickness: 15-20 μm
- Scanning time: approx. 1-2 h
- Sublimation time: approx. 4 h
- Eliminates reflections without loss of colour information
- Thin and homogeneous coating
- Transparent vanishing dulling spray
299.00 د.إ.
- جديد
- غير متوفر حالياً
AESUB
AESUB Orange 3D Scanning Spray
- AESUB Orange 3D Scanning Spray
- Layer thickness: 2-6 μm
- Scanning time: approx. 4-8 h
- Sublimation time: approx. 12-24 h
- White coating
- No cleaning required
- Thin and homogeneous coating
- Developed and approved by scanning experts
299.00 د.إ.
- جديد
- غير متوفر حالياً
AESUB
AESUB BLUE 3D Scanning Spray
- AESUB BLUE 3D Scanning Spray
- Layer thickness: 8-15 μm
- Vanishing Scanningspray
- 100% Scanable
- White coating
- Scanning time: approx. 1-2 h
- Sublimation time: approx. 4 h
- Developed and approved by scanning experts
299.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSUN ePLA-Magic Dark Twinkling
- eSUN ePLA-Magic Dark Twinkling
- Density 1.21 g/cm3
- Tensile Strength 34.18MPa
- Elongation at Break 4.25%
- Flexural Modulus 3459 MPa
- Printing Temp 190- 220℃
- Bed Temp 45-60°C
- Printing Speed 40 - 300mm/s
110.00 د.إ.
- جديد
- غير متوفر حالياً
SOVOL
Sovol SV08
- Sovol SV08 3D Printer
- Fast & Affordable Voron 2.4 Alternative
- Printing Speed Up to 700mm/s
- Build Volume 350x350x345mm
- 4 Independent Z Motors
- Quad-Gantry-Leveling
- All-axes Linear Rails
- Built-in Camera
- Maximum Bed Temp 100
- Maximum Nozzle Temp 300
- 5" Touch Screen Control Panel
3,500.00 د.إ.
- جديد
- غير متوفر حالياً
SOVOL
Sovol Comgrow T500
- Sovol Comgrow T500 3D printer
- Full Metal Aluminum Alloy Frame
- Build Volume 500*500*500mm
- Print Speed up to 500mm/s
- Maximum Nozzle Temp 300℃
- Maximum Build Plate Temp 80℃
- Linear Rails On XYZ Axis For Enhanced Stability
- Klipper Firmware Installed
- high-precision stepper motor system
- Impeccable 49-point leveling precision
3,900.00 د.إ.
- جديد
- غير متوفر حالياً
SOVOL
Sovol Comgrow T300
- Sovol Comgrow T300 3D Printer
- Build Volume 300*300*350mm
- Printing Speed Up to 600mm/s
- Intelligent Core Based on Klipper
- All metal structure
- Reliable Filament Extrusion
- Nozzle Tempreture Up to 300℃
- Build Plate Tempreture Up to 100℃
- Layer Height 0.08-0.36mm
- Auto Bed Leveling
2,500.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSun eABS Max
- eSun eABS Max
- High impact resistance
- High toughness
- Antiflaming
- Density 1.05 g/cm3
- Tensile Strength 45MPa
- Elongation at Break 30%
- Flexural Strength 58MPa
- Extruder Temperature 240 – 270℃
- Bed temperature 95 – 110°C
- Printing Speed 40 – 100mm/s
77.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSun ePLA-Lite
- eSun ePLA-Lite Filament
- A cost-effective choice
- Excellent printability
- Density 1.23 g/cm3
- Tensile Strength 61.34 MPa
- Elongation 29.92%
- Durability 40%
- Extruder Temperature 190 – 230℃
- Bed temperature 45 – 60°C
- Printing Speed 40 – 100mm/s
49.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSun Luminous-PLA
- eSun Luminous-PLA
- Stunning luminescent effect in low-light
- Enhancing aesthetics and fun
- Density 1.2g/cm3
- Durability 40%
- Tensile Strength 72MPa
- Elongation at Break 11.8%
- IZOD Impact Strength 5.4kJ/㎡
- Extruder Temp 210-230℃
- Bed Temp 45 – 60°C
79.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSun ePLA-Silk Mystic
- eSun ePLA-Silk Mystic
- Mystery Three-color
- Silk glossy texture
- Excellent printability
- Prop Extruder Temp 190 – 230℃
- Prop Bed Temp 45 – 60°C
- Tensile Strength 57.64 MPa
- Density 1.256 g/cm3
- Flexural Strength Mpa
115.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSun ePLA-Matte
- eSun ePLA-Matte Filament
- Matte surface effect
- High-speed printing
- Easy to peel off the support
- Excellent printability
- Prop Bed Temp 45~60
- Prop Extruder Temp 190~230
- Density 1.329 g/cm³
- Elongation at break 50%
95.00 د.إ.
- جديد
- غير متوفر حالياً
FLASHFORGE
FlashForge Adventurer 5M
- FlashForge Adventurer 5M 3D Printer
- Build Volume 220*220*220mm
- Printing Speed 600mm/s
- Max Extruder Temp 280℃
- Max Bed Temp 110 ℃
- Layer Thickness 0.1-0.4 mm
- Print Precision ±0.2 mm
2,390.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSUN ePLA-HS
- eSun ePLA-HS Filament
- Suitable for high-speed printing
- Smooth flow without blocking
- Quick Cooling and forming
- Density 1.24 g/cm3
- Extruder Temp 210-230
- Bed Temp 45-60
- Printing Speed 350mm/s
85.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSun eTPU-HS
- eSun eTPU-HS Filament
- Flexible and soft
- High elasticity
- High toughness
- Nozzle Temp 220~250°C
- Bed Temp 45~60°C
- Durability 90%
- Printing Speed 50 – 200mm/s
- Build Surface : Masking paper, PVP solid glue, PEI
145.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSun eTPU-95A
- eSun eTPU-95A Filament
- Flexible and soft
- Sturdy and durable
- Compatible with all of 3D Printers
- Extruder Temp 220-250
- Bed Temp 40-60
- Printing Speed 50mm/s
- Duribility 90%
130.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSUN ABS
- eSUN ABS Filament
- Unbelievable Toughness
- Impact resistance
- Heat resistance
- Density(g/cm3) 1.04
- Heat Distortion 78℃ 0.45MPa
- Melt Flow Index(g/10min) 12(220℃/10kg）
- Tensile Strength 43MPa
- Elongation at Break 22%
- Extruder Temp 230 – 270℃
- Bed Temp 95 – 110°C
70.00 د.إ.