English
العربيةGet Up To 50% OFF New Season Styles, Limited Time Only.
Left Banner
منتجات جديدة
منتجات جديدة
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
وصل حديثاً
- جديد
- غير متوفر حالياً
AESUB
AESUB Transparent 3D Scanning Spray
- AESUB Transparent 3D Scanning Spray
- Layer thickness: 15-20 μm
- Scanning time: approx. 1-2 h
- Sublimation time: approx. 4 h
- Eliminates reflections without loss of colour information
- Thin and homogeneous coating
- Transparent vanishing dulling spray
299.00 د.إ.
- جديد
- غير متوفر حالياً
AESUB
AESUB Orange 3D Scanning Spray
- AESUB Orange 3D Scanning Spray
- Layer thickness: 2-6 μm
- Scanning time: approx. 4-8 h
- Sublimation time: approx. 12-24 h
- White coating
- No cleaning required
- Thin and homogeneous coating
- Developed and approved by scanning experts
299.00 د.إ.
- جديد
- غير متوفر حالياً
AESUB
AESUB BLUE 3D Scanning Spray
- AESUB BLUE 3D Scanning Spray
- Layer thickness: 8-15 μm
- Vanishing Scanningspray
- 100% Scanable
- White coating
- Scanning time: approx. 1-2 h
- Sublimation time: approx. 4 h
- Developed and approved by scanning experts
299.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSUN ePLA-Magic Dark Twinkling
- eSUN ePLA-Magic Dark Twinkling
- Density 1.21 g/cm3
- Tensile Strength 34.18MPa
- Elongation at Break 4.25%
- Flexural Modulus 3459 MPa
- Printing Temp 190- 220℃
- Bed Temp 45-60°C
- Printing Speed 40 - 300mm/s
110.00 د.إ.
- جديد
- غير متوفر حالياً
155.00 د.إ.
- جديد
- غير متوفر حالياً
110.00 د.إ.
- جديد
- غير متوفر حالياً
BAMBU LAB
Bambu Lab X1 P1 Extruder Motor
- Bambu Lab X1 P1 Extruder Motor
- Compatibe With X1 Carbon and P1 Series
- 36-series circular stepping motor
115.00 د.إ.
- جديد
- غير متوفر حالياً
BAMBU LAB
Bambu Lab High Resolution Screen X1 Carbon
- Bambu Lab High Resolution Screen X1 Series
- 5-inch Touch screen
- Resolution 1280*720 Pixel
- Compatible With X1 Carbon
675.00 د.إ.
- جديد
- غير متوفر حالياً
BAMBU LAB
Bambu Lab Front Housing Assembly X1 Series
- Bambu Lab Front Housing Assembly X1 Series
- With Front Cooling Fan
- Easy to Replace
175.00 د.إ.
- جديد
- غير متوفر حالياً
BAMBU LAB
Bambu Lab X1 Hardened Steel Extruder Unit
- Bambu Lab X1 Hardened Steel Extruder Unit
- Compatible With X1 and X1C
- Reduction Ratio 9 : 53
- Supported Filament Diameter 1.75 mm
- Support a Wide Range of Filaments
199.00 د.إ.
- جديد
- غير متوفر حالياً
BAMBU LAB
Bambu Lab P1P Enclosure Kit
- Bambu Lab P1P Enclosure Kit
- Enhanced Heat Dissipation
- Reliable Motion Performance
- Improve Printing Quality
- Print a wide range of filaments
799.00 د.إ.
- جديد
- غير متوفر حالياً
BAMBU LAB
Bambu Dual-Texture PEI Plate
- Bambu PEI Plate with Dual Textures
- Automatically Releases as it Cools
- Superior First-Layer Adhesion
- Features Both Smooth and Matte Finishes
- Delivers High Precision in Z-axis Printing
199.00 د.إ.
- جديد
- غير متوفر حالياً
BAMBU LAB
Bambu Lab AMS
- Bambu Lab Automatic Material System
- Support for Multiple Colors/Materials
- Ensure Filament Stays Dry
- Detect Filament Runout & Winding Issues
- AMS Filament Backup System
2,200.00 د.إ.
- جديد
- غير متوفر حالياً
375.00 د.إ.
- جديد
- غير متوفر حالياً
BAMBU LAB
Bambu Complete Hotend X1 and P1
- Bambu Complete Hotend X1 and P1
- Available in Different Sizes
- Easy to Replace
- Compatible with a wide range of filaments
179.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSun eABS Max
- eSun eABS Max
- High impact resistance
- High toughness
- Antiflaming
- Density 1.05 g/cm3
- Tensile Strength 45MPa
- Elongation at Break 30%
- Flexural Strength 58MPa
- Extruder Temperature 240 – 270℃
- Bed temperature 95 – 110°C
- Printing Speed 40 – 100mm/s
77.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSun ePLA-Lite
- eSun ePLA-Lite Filament
- A cost-effective choice
- Excellent printability
- Density 1.23 g/cm3
- Tensile Strength 61.34 MPa
- Elongation 29.92%
- Durability 40%
- Extruder Temperature 190 – 230℃
- Bed temperature 45 – 60°C
- Printing Speed 40 – 100mm/s
49.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSun Luminous-PLA
- eSun Luminous-PLA
- Stunning luminescent effect in low-light
- Enhancing aesthetics and fun
- Density 1.2g/cm3
- Durability 40%
- Tensile Strength 72MPa
- Elongation at Break 11.8%
- IZOD Impact Strength 5.4kJ/㎡
- Extruder Temp 210-230℃
- Bed Temp 45 – 60°C
79.00 د.إ.
- جديد
- غير متوفر حالياً
BAMBU LAB
Bambu Lab PLA Matte
- Bambu Lab PLA Matte
- Matte Surface Texture
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Compatible With All kind of 3D Printer
- Density 1.24 g/cm3
135.00 د.إ.