English
العربيةGet Up To 50% OFF New Season Styles, Limited Time Only.
Left Banner
منتجات جديدة
منتجات جديدة
- جديد
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
عامل التصفية النشط
- غير متوفر حالياً
Polymaker
Polymaker PolySonic PLA
- Polymaker PolySonic PLA
- High-speed 3D printing filament
- Nozzle Temp 210~230°C
- Bed Temp 30~60°C
- Printing Speed up to 300mm/s
- Density 1.23 g/cm3
- Glass transition temperature 59°C
59.00 د.إ.
- غير متوفر حالياً
Polymaker
Polymaker PolyLite ASA
- Polymaker PolyLite ASA Filament
- Weather Resistance
- UV Resistance
- Density 1.13 g/cm3
- Weak Acids Resistant
- Charpy impact strength 10.3±0.4 kJ/m2
- Elongation at break 6.7±0.6%
- Nozzle Temperature 240–260℃
- Build plate temperature 75-95˚C
95.00 د.إ.
- غير متوفر حالياً
Polymaker
Polymaker PolyLite PLA
- Polymaker PolyLite PLA Filament
- Density 1.17 g/cm3
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Tensile strength 46.6 ± 0.9 MPa
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- Printing speed 40-60mm/s
60.00 د.إ.
- غير متوفر حالياً
Polymaker
Polymaker PolyLite Dual Silk PLA
- PolyLite Dual Silk PLA Filament
- Density 1.17 g/cm3
- Tensile strength 46.6 ± 0.9 MPa
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- printing speed 40-60mm/s
99.00 د.إ.
- غير متوفر حالياً
eSUN
eSun Luminous-PLA
- eSun Luminous-PLA
- Stunning luminescent effect in low-light
- Enhancing aesthetics and fun
- Density 1.2g/cm3
- Durability 40%
- Tensile Strength 72MPa
- Elongation at Break 11.8%
- IZOD Impact Strength 5.4kJ/㎡
- Extruder Temp 210-230℃
- Bed Temp 45 – 60°C
79.00 د.إ.
- غير متوفر حالياً
eSUN
eSun ePLA-Lite
- eSun ePLA-Lite Filament
- A cost-effective choice
- Excellent printability
- Density 1.23 g/cm3
- Tensile Strength 61.34 MPa
- Elongation 29.92%
- Durability 40%
- Extruder Temperature 190 – 230℃
- Bed temperature 45 – 60°C
- Printing Speed 40 – 100mm/s
49.00 د.إ.
- غير متوفر حالياً
eSUN
eSun eABS Max
- eSun eABS Max
- High impact resistance
- High toughness
- Antiflaming
- Density 1.05 g/cm3
- Tensile Strength 45MPa
- Elongation at Break 30%
- Flexural Strength 58MPa
- Extruder Temperature 240 – 270℃
- Bed temperature 95 – 110°C
- Printing Speed 40 – 100mm/s
77.00 د.إ.
- غير متوفر حالياً
CREALITY
Creality Ender-PLA Filament 2KG
- Creality Ender-PLA Filament 2KG
- Density 1.25g/cm³
- Tensile Strength : 33MPa
- Bending Strength : 75MPa
- Impact Strength : 7.33/m
- Priting Temperature 190℃-230℃
- Hotbed Temperature 25°℃ -60℃
- Print Speed 40-80mm/s
110.00 د.إ.
- غير متوفر حالياً
eSUN
eSUN ePLA-Magic Dark Twinkling
- eSUN ePLA-Magic Dark Twinkling
- Density 1.21 g/cm3
- Tensile Strength 34.18MPa
- Elongation at Break 4.25%
- Flexural Modulus 3459 MPa
- Printing Temp 190- 220℃
- Bed Temp 45-60°C
- Printing Speed 40 - 300mm/s
110.00 د.إ.
