الصفحة الرئيسية

CREALITY SPARKX i7 COMBO Dubai Abu Dhabi UAE

جديد
غير متوفر حالياً

CREALITY CREALITY SPARKX i7 COMBO

CREALITY SPARKX i7 COMBO
Build Volume: 260×260×255 mm
Max Speed: ≤500 mm/s
Acceleration: ≤10000 mm/s²
Extruder: Direct Drive
Nozzle System: Quick-Swap Hotend
Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
Input Shaping + Pressure Advance
AI Camera: 720p with Smart Detection
Auto Leveling and Z-Offset Calibration
Print Surface: Dual-sided PEI Plate
Compatible Materials: PLA, PETG, TPU, PLA-CF
Connectivity: Wi-Fi, USB Drive, RS-485
Storage: 8G EMMC + Creality OS
CFS Lite / CFS Mini Multicolor Support

Bambu Lab H2S AMS Combo 3D Printer Dubai Abu Dhabi UAE

غير متوفر حالياً

BAMBU LAB Bambu Lab H2S AMS Combo 3D Printer

حجم طباعة كبير 340×320×340 مم
طباعة متعددة الألوان مع AMS 2 Pro
دعم حتى 24 لونًا ومواد متعددة
معايرة بصرية بدقة 5 ميكرومتر
فوهة معدنية تتحمل حرارة 350°
حجرة طباعة مُسخنة حتى 65°
نظام تجفيف أوتوماتيكي للخيوط
23 مستشعرًا ذكيًا و 3 كاميرات AI
سرعة طباعة تصل إلى 1000 مم/ث
محرك سيرفو بقوة بثق أعلى 67٪
دعم وحدة ليزر اختيارية بقوة 10 واط
نظام تعويض الاهتزازات النشط
هيكل معدني قوي ومتين للغاية
تشغيل هادئ بمستوى ضوضاء أقل من 50 ديسيبل

8,250.00 د.إ.‏

Bambu Lab H2D AMS Combo Dubai.Abu Dhabi.UAE

غير متوفر حالياً

BAMBU LAB Bambu Lab H2D AMS Combo 3D Printer

Dual-nozzle system for multi-material & multi-color printing
Maximum print speed up to 600mm/s
Massive build volume: 350×320×325 mm³
High-temperature all-metal hotend: up to 350°C
65°C actively heated chamber for warp-free printing
Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
REAL High-Flow Hotend: up to 65mm³/s flow rate
Intelligent DynaSense Extruder with closed-loop servo control
Automatic multi-color and multi-filament printing
Supports up to 16 filaments
15-point filament monitoring system for feeding, tip location, tension & flow
AI and Smart Features
AI-powered pre-flight checklist
Built-in cameras: BirdsEye, Nozzle, Toolhead
Auto bed leveling and Z-offset calibration
Real-time error detection (clogs, tangles, under-extrusion)
Power loss recovery & filament runout detection
Compatible with optional 10W / 40W laser modules
Compatible with digital cutting blade module
Compatible with pen plotter tool for writing/drawing
Quick-swap toolheads with automatic recognition
Laser Power: 10W or 40W (455nm)
Engraving area: up to 310×270 mm
Engraves and cuts wood, acrylic, leather, rubber, and more
Micro Lidar for 3D mesh generation and Z-height sensing
Built-in air assist, flame detection, and safety systems
Digital Cutting & Drawing
Cutting area: 300×285 mm²
Blade pressure: 50gf to 600gf
Supports vinyl, paper, fabric, leather, etc.

11,800.00 د.إ.‏

غير متوفر حالياً

BAMBU LAB Bambu Lab A1 Combo

Bambu Lab A1 Combo 3D printer
Multi-Color Printing With AMS
Build Volume:256*256*256 mm³
Max Speed : 500mm/s
Max Hot End Temperature : 300 ℃
Max Build Plate Temp: 100℃
built-in Monitoring camera

2,990.00 د.إ.‏

غير متوفر حالياً

CREALITY Creality K1C

Creality K1C 3D Printer
600mm/s Printing Speed
Versatile Ai LiDAR
Priting Dimention : 220*220*250mm
Maximum Hotend Temp 300℃
Maximum HotBed Temp 100℃
Equipted to Ai Camera
equipped to Air Purifier

2,200.00 د.إ.‏

غير متوفر حالياً

CREALITY Creality K2 Plus

Creality K2 Plus 3D Printer
Build Volume 350x350x350mm
Printing Speed Up to 600mm/s
Max Nozzle Temp 350°C
Max Bed Temp 120°C
Ai Pritning Control System
Printing Accuracy 100mm±0.1mm
Extruder Apus dual-gear direct drive extruder
Fully Automatic Leveling
Actively heated chamber
Conectivity RJ45 ethernet, Wifi

غير متوفر حالياً

BAMBU LAB Bambu Lab X1-Carbon Combo

Bambu Lab X1 Carbon COMBO 3D printer
Equipped with the AMS System
Build Volume:256×256×256mm
High quality printing with 7 μm Lidar Resolution
Max Speed : 500mm/s
Max Hot End Temperature : 300 ℃
Max Build Plate Temp: 110℃
built-in chamber camera

6,700.00 د.إ.‏

غير متوفر حالياً

BAMBU LAB Bambu Lab P1P

Regular fit, round neckline, short sleeves. Made of extra long staple pima cotton.

3,360.00 د.إ.‏

غير متوفر حالياً

BAMBU LAB Hummingbird printed sweater

Bambu Lab P1S 3D printer
Build Volume:256×256×256mm
Max Speed : 500mm/s
Max Hot End Temperature : 300 ℃
Max Build Plate Temp: 110℃
Enclosed-body for high-temperature filament printing
Up to 16-color printing with AMS
built-in chamber camera

5,950.00 د.إ.‏

غير متوفر حالياً

BAMBU LAB Bambu Lab A1 mini

Bambu Lab A1 mini 3D printer
Build Volume:180*180*180 mm³
Max Speed : 500mm/s
Max Hot End Temperature : 300 ℃
Max Build Plate Temp: 80℃
built-in Monitoring camera

2,250.00 د.إ.‏

غير متوفر حالياً

BAMBU LAB Bambu Lab P1S

Bambu Lab P1S 3D printer
Build Volume:256×256×256mm
Max Speed : 500mm/s
Max Hot End Temperature : 300 ℃
Max Build Plate Temp: 110℃
built-in chamber camera

3,300.00 د.إ.‏

غير متوفر حالياً

CREALITY Creality Ender-3 V3

CREALITY Ender-3 V3 3D Printer
Build Volume 220*220*250mm
Print Speed Up to 600 mm/s
Hotend Max Temp 300 °C
Build Plate Max Temp 110 °C
Automatic Levelling
4.3" Touch Screen Controller
Klipper Frimware
Layer Height 0.1-0.35mm

1,699.00 د.إ.‏

غير متوفر حالياً

CREALITY Creality Sermoon D3

CREALITY Sermoon D3
Build Volume 300*250*300mm
Print Speed Up to 250 mm/s
Hotend Max Temp 300 °C
Build Plate Max Temp 110 °C
Automatic Levelling With CR-Touch Sensor
4.3" Removable Touch Screen Controller
Layer Height 0.1-0.4mm

9,250.00 د.إ.‏

غير متوفر حالياً

BAMBU LAB Bambu Lab X1E

Bambu Lab X1E 3D printer
Build Volume:256×256×256mm
High quality printing with 7 μm Lidar Resolution
Max Speed : 500mm/s
Max Hot End Temperature : 320 ℃
Chamber Control Temperature 60℃
Max Build Plate Temp: 110℃
built-in chamber camera

13,500.00 د.إ.‏

غير متوفر حالياً

BAMBU LAB Bambu Lab A1 mini Combo

Bambu Lab A1 mini Combo 3D printer
Equipped with AMS system
Build Volume:180*180*180 mm³
Max Speed : 500mm/s
Max Hot End Temperature : 300 ℃
Max Build Plate Temp: 80℃
built-in Monitoring camera

2,900.00 د.إ.‏

غير متوفر حالياً

CREALITY Creality HALOT-MAGE

10.3-inch 8K mono LCD
FEP Release Film
Integral Light Source 3.0
Print Speed 1~5 Layer/s
XY Resolution of 29.7um
Build Volume of 228x128x230 mm³
4.3-inch Capacitive Touch Screen Controller

999.00 د.إ.‏

غير متوفر حالياً

CREALITY Creality CR-M4

CREALITY CR-M4 3D Printer
Build Volume 450*450*470mm
Print Speed Up to 120 mm/s
Hotend Max Temp 300 °C
Build Plate Max Temp 100 °C
Automatic Levelling 25-point
4.3" Removable Touch Screen Controller
Layer Height 0.05-0.35mm

3,450.00 د.إ.‏

Creality Sermoon D3 PRO Dubai Abu Dhabi UAE

غير متوفر حالياً

CREALITY Creality Sermoon D3 PRO

CREALITY Sermoon D3 PRO
Dual Extrusion System
Build Volume 300*250*300mm
Print Speed Up to 250 mm/s
Hotend Max Temp 300 °C
Build Plate Max Temp 110 °C
Automatic Levelling With CR-Touch Sensor
4.3" Removable Touch Screen Controller
Layer Height 0.1-0.4mm

10,500.00 د.إ.‏

Creality Ender-3 V3 SE Dubai Abu Dhabi UAE

غير متوفر حالياً

CREALITY Creality Ender-3 V3 SE

Creality Ender-3 V3 SE 3D Printer
Build Volume:220*220*250mm
Max Printing Speed:250mm/s
Max Nozzle Temperature 260℃
Max Heatbed Temperature:≤100℃
Printing Accuracy:±0.1mm
3.2'' Color Knob Screen Controller

875.00 د.إ.‏

غير متوفر حالياً

CREALITY Creality Ender-5 S1

Creality Ender-5 S1 3D Printer
Build Volume 220*220*280mm
Printing Speed 250mm/s
Max Nozzle Temp 300℃
Max Bed Temp 110℃
CR Touch auto-leveling
4.3" Touch Screen Controller
Printing Accuracy ±0.1mm

2,200.00 د.إ.‏

Creality Ender-3 S1 Pro Dubai.Abu Dhabi.UAE

غير متوفر حالياً

CREALITY Creality Ender-3 S1 Pro

Creality Ender-3 S1 Pro 3D Printer
Build Volume 220*220*270mm
Max Printing Speed 160mm/s
Max Nozzle Temp 300°C
Max Bed Temp 110°C
Layer Thickness 0.1-0.35mm
Printing Precision 0.1mm
CR Touch Auto Bed Leveling

999.00 د.إ.‏

غير متوفر حالياً

CREALITY Creality CR-10 SE

Creality CR-10 SE 3D Printer
Build Volume 220*220*625mm
Priting Speed 600mm/s
Max Nozzle Temp 300°C
Max Bed Temp 110°C
4.3 Touch Screen Controller
Layer Thickness 0.1~0.35mm
Auto Bed Leveling With CR Touch Sensor
Hardened steel nozzle

1,700.00 د.إ.‏

Creality HALOT-MAGE S 14K Dubai Abu Dhabi UAE

غير متوفر حالياً

CREALITY Creality HALOT-MAGE S 14K

Creality HALOT-MAGE S 14K Resin 3D Printer
10.1" LCD with 14K Resolution
Dynax+ Mode for 150mm/h Speed
Build Volume: 223*126*230mm
Layer Height: 0.05-0.2mm
Mono LCD Resolution 13320*5120
XY Resolution: 16.8*24.8μm
Light Intensity: 3500±10%μW/cm²
Release Film: FEP
Integral Light Source 3.0

2,990.00 د.إ.‏

غير متوفر حالياً

CREALITY Creality K1 SE

Creality K1 SE 3D Printer
Build Volume 220*220*250mm
Printing Speed 600mm/s
Printing Accuracy 100±0.1mm
Nozzle Temperature ≤300℃
Heatbed Temperature ≤100℃
Layer Height 0.1-0.35mm
4.3" Touch Screen Controller
Built in wifi
Fully Automatic Leveling
Power Loss Recover
Slicing Software Creality Print 5.0, Cura, PrusaSlicer

2,750.00 د.إ.‏

shop by category

الصفحة الرئيسية

Left Banner

منتجات جديدة

منتجات جديدة

الصفحة الرئيسية

اتصل بنا

Products

Our company

Information

Trending Category

shop by category

الصفحة الرئيسية  

Left Banner  

منتجات جديدة

منتجات جديدة  

الصفحة الرئيسية

الصفحة الرئيسية

Left Banner

منتجات جديدة