الصفحة الرئيسية

• Revopoint MetroX 3D Scanner
• Metrology Grade Accuracy up to 0.01 mm
• Scanning Speed Up to 7,000,000 Points/s
• 14 Blue Laser Cross lines Light Source
• 62 lines of blue light fast point cloud creation
• Compatible With Automated Turntable Scan
• 6-AXIS 3D Scanning Stabilizer
• Output formats PLY, OBJ, STL, ASC, 3MF, GLTF, FBX

• حجم طباعة كبير 340×320×340 مم
• طباعة متعددة الألوان مع AMS 2 Pro
• دعم حتى 24 لونًا ومواد متعددة
• معايرة بصرية بدقة 5 ميكرومتر
• فوهة معدنية تتحمل حرارة 350°
• حجرة طباعة مُسخنة حتى 65°
• نظام تجفيف أوتوماتيكي للخيوط
• 23 مستشعرًا ذكيًا و 3 كاميرات AI
• سرعة طباعة تصل إلى 1000 مم/ث
• محرك سيرفو بقوة بثق أعلى 67٪
• دعم وحدة ليزر اختيارية بقوة 10 واط
• نظام تعويض الاهتزازات النشط
• هيكل معدني قوي ومتين للغاية
• تشغيل هادئ بمستوى ضوضاء أقل من 50 ديسيبل

• Dual-nozzle system for multi-material & multi-color printing
• Maximum print speed up to 600mm/s
• Massive build volume: 350×320×325 mm³
• High-temperature all-metal hotend: up to 350°C
• 65°C actively heated chamber for warp-free printing
• Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
• REAL High-Flow Hotend: up to 65mm³/s flow rate
• Intelligent DynaSense Extruder with closed-loop servo control
• Automatic multi-color and multi-filament printing
• Supports up to 16 filaments
• 15-point filament monitoring system for feeding, tip location, tension & flow
• AI and Smart Features
• AI-powered pre-flight checklist
• Built-in cameras: BirdsEye, Nozzle, Toolhead
• Auto bed leveling and Z-offset calibration
• Real-time error detection (clogs, tangles, under-extrusion)
• Power loss recovery & filament runout detection
• Compatible with optional 10W / 40W laser modules
• Compatible with digital cutting blade module
• Compatible with pen plotter tool for writing/drawing
• Quick-swap toolheads with automatic recognition
• Laser Power: 10W or 40W (455nm)
• Engraving area: up to 310×270 mm
• Engraves and cuts wood, acrylic, leather, rubber, and more
• Micro Lidar for 3D mesh generation and Z-height sensing
• Built-in air assist, flame detection, and safety systems
• Digital Cutting & Drawing
• Cutting area: 300×285 mm²
• Blade pressure: 50gf to 600gf
• Supports vinyl, paper, fabric, leather, etc.

• Bambu Lab A1 Combo 3D printer
• Multi-Color Printing With AMS
• Build Volume:256*256*256 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 100℃
• built-in Monitoring camera

• Revopoint MIRACO 3D Scanner
• 6” 2k AMOLED Touch Screen
• 0.05 mm accuracy
• Up to 0.02 mm precision
• 48 Megapixel RGB Camera
• Up to 2 hours of Scanning
• Single Capture  28x53mm at 100 mm
• Minimum Scan Volume 10x10x10mm
• Working Distance 100 ~ 1000 mm
• Internal Storage 256 GB eMMC
• Maxmium Scan Volume 4000x4000x4000mm
• Light Source Class 1 Infrared Light
• CPU 8-core CPU，2.4 GHz

• Revopoint MIRACO PRO 3D Scanner
• 6” 2k AMOLED Touch Screen
• 0.05 mm accuracy
• Up to 0.02 mm precision
• 32GB RAM DDR4
• 48 Megapixel RGB Camera
• Up to 2 hours of Scanning
• Single Capture  28x53mm at 100 mm
• Minimum Scan Volume 10x10x10mm
• Working Distance 100 ~ 1000 mm
• Internal Storage 256 GB eMMC
• Maxmium Scan Volume 4000x4000x4000mm
• Light Source Class 1 Infrared Light
• CPU 8-core CPU，2.4 GHz

• Revopoint MINI 2 Standard Edition
• Accuracy Up to 0.05 mm
• Precision Up to 0.02 mm
• Scanning Speed 16fps
• Capture Area at Furthest Distance 168 x 132 mm at 250 mm
• Working Distance 120 - 250 mm
• Point Distance Up to 0.02 mm
• Minimum Scan Volume 10x10x10mm
• Position Sensors 9-axis IMU
• Light Source Class 1 Blue Light
• Tracking Methods: Feature/Marker
• Wi-Fi 6 and USB Type-C ConnectIvity

• Revopoint MINI 2 Advanced Edition
• Accuracy Up to 0.05 mm
• Precision Up to 0.02 mm
• With Dual-axis Turntable
• Scanning Speed 16fps
• Capture Area at Furthest Distance 168 x 132 mm at 250 mm
• Working Distance 120 - 250 mm
• Point Distance Up to 0.02 mm
• Minimum Scan Volume 10x10x10mm
• Position Sensors 9-axis IMU
• Light Source Class 1 Blue Light
• Tracking Methods: Feature/Marker
• Wi-Fi 6 and USB Type-C ConnectIvity

• Revopoint POP 3 Premium Edition 3D Scanner
• With Handheld Stabilizer
• Accuracy 0.1mm
• 18 fps Smooth Scanning
• Point Distance 0.05mm
• Support Color Scans
• Enhanced Tracking With 4 Infrared LEDs
• Smart Stabilization
• FOV 40x25°
• Maxmium Scan Volume 2500x2500x2500mm
• Light Source : Infrared Fill Lights, White Flash LEDs
• Single Capture 244x180mm at 400mm
• Scanning Environment Indoors and Outdoors
• Output Formats PLY, OBJ, and STL

• Revopoint POP 3 Advanced Edition 3D Scanner
• With Dual-Axis Turntable
• Accuracy 0.1mm
• 18 fps Smooth Scanning
• Point Distance 0.05mm
• Support Color Scans
• Enhanced Tracking With 4 Infrared LEDs
• Smart Stabilization
• FOV 40x25°
• Maxmium Scan Volume 2500x2500x2500mm
• Light Source : Infrared Fill Lights, White Flash LEDs
• Single Capture 244x180mm at 400mm
• Scanning Environment Indoors and Outdoors
• Output Formats PLY, OBJ, and STL

• Revopoint POP 3 Standard Edition 3D Scanner
• Accuracy 0.1mm
• 18 fps Smooth Scanning
• Point Distance 0.05mm
• Support Color Scans
• Enhanced Tracking With 4 Infrared LEDs
• Smart Stabilization
• FOV 40x25°
• Maxmium Scan Volume 2500x2500x2500mm
• Light Source : Infrared Fill Lights, White Flash LEDs
• Single Capture 244x180mm at 400mm
• Scanning Environment Indoors and Outdoors
• Output Formats PLY, OBJ, and STL

• Bambu Lab X1 Carbon COMBO 3D printer
• Equipped with the AMS System
• Build Volume:256×256×256mm
• High quality printing with 7 μm Lidar Resolution
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• Revopoint INSPIRE 3D Scanner
• Up to 0.2 mm Accuracy
• Scanning Speeds 14 to 18 fps
• Steady Scan With 9-axis IMU
• Point Distance 0.3mm
• Light Source 2 IR LEDS + White LED
• Working Distance 250~500mm
• Single Capture Area : 308*225mm @500mm

• Revopoint RANGE 2 3D Scanner
• Precision Up to 0.1 mm
• Support Color 3D Scan
• Working Distance 400 - 1300 mm
• Max FOV 860x1380 mm@1300mm
• Working Distance 400 - 1300 mm
• Point Distance Up to 0.1 mm
• Light Source White Light & Infrared
• Output File Formats PLY, OBJ, and STL
• Frame Rate : 16 fps
• Support Wi-Fi 6

Regular fit, round neckline, short sleeves. Made of extra long staple pima cotton.

• Bambu Lab P1S 3D printer
• Build Volume:256×256×256mm
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• Enclosed-body for high-temperature filament printing
• Up to 16-color printing with AMS
• built-in chamber camera

• Bambu Lab A1 mini 3D printer
• Build Volume:180*180*180 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 80℃
• built-in Monitoring camera

• Revopoint POP 3 PLUS Advanced
• With mini Turntable
• Accuracy  up to 0.08 mm
• Single-frame Precision, up to 0.04 mm
• Working Distance 150 ~ 400 mm
• FOV 244 x 180 mm at 400mm
• Minimum Scan Volume 20x20x20mm
• Maximum Scan Volume 2×2×2m
• Scanning Speed up to 18 fps
• Support Color Scanning
• Tracking Methods Feature, Marker
• Light Source Class 1 InfraredLight
• Position Sensors 9-axis IMU
• Output File Formats PLY, OBJ, STL, ASC, 3MF, GLTF, FBX
• Wi-Fi 6,Bluetooth 4.1

• Bambu Lab P1S 3D printer
• Build Volume:256×256×256mm
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• Revopoint POP 3 PLUS Premium
• With Dual-Axis Turntable and Hanheld Stabilizer
• Accuracy  up to 0.08 mm
• Single-frame Precision, up to 0.04 mm
• Working Distance 150 ~ 400 mm
• FOV 244 x 180 mm at 400mm
• Minimum Scan Volume 20x20x20mm
• Maximum Scan Volume 2×2×2m
• Scanning Speed up to 18 fps
• Support Color Scanning
• Tracking Methods Feature, Marker
• Light Source Class 1 InfraredLight
• Position Sensors 9-axis IMU
• Output File Formats PLY, OBJ, STL, ASC, 3MF, GLTF, FBX
• Wi-Fi 6,Bluetooth 4.1

• Markerless 3D scanning with optical tracking
• Volumetric Accuracy 0.025mm + 0.04mm x L(m)
• Fused Point Distance, up to 0.05 mm
• 30-line cross-laser mode for fast surface scanning
• Single-frame Accuracy 0.02 mm
• Scan speed Up to 1,500,000 points/Sec
• Capture Small (10 mm) to Big Objects (6 m)
• Carbon fiber body for lightweight durability
• Real-time error correction during scanning
• Compatible with CAD and 3D inspection software
• Suitable for dark and reflective surfaces
• Easy repositioning of tracking base
• High-detail output ready for engineering use
• Ideal for aerospace, automotive, and mold making
• Supports digital documentation and reverse engineering

• Bambu Lab X1 Carbon 3D printer
• Build Volume:256×256×256mm
• High quality printing with 7 μm Lidar Resolution
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera