English
العربيةGet Up To 50% OFF New Season Styles, Limited Time Only.
Left Banner
منتجات جديدة
منتجات جديدة
- جديد
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
عامل التصفية النشط
- غير متوفر حالياً
ELEGOO
ELEGOO Saturn 3 Ultra 12K
- 10-inch 12K Mono LCD
- ACF Release Film
- Light Source COB+Reflective Light Source
- Print Speed Up to 150mm/h
- Linux OS with 4Gb RAM
- XY Resolution of 19×24μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 218.88×122.88×260 mm³
- 4.0-inch Capacitive Touch Screen Controller
1,650.00 د.إ.
- غير متوفر حالياً
CREALITY
Creality Ender-PLA Filament 2KG
- Creality Ender-PLA Filament 2KG
- Density 1.25g/cm³
- Tensile Strength : 33MPa
- Bending Strength : 75MPa
- Impact Strength : 7.33/m
- Priting Temperature 190℃-230℃
- Hotbed Temperature 25°℃ -60℃
- Print Speed 40-80mm/s
110.00 د.إ.
- غير متوفر حالياً
ELEGOO
ELEGOO Mars 3 Ultra 9K
- 7-inch 9K mono LCD
- ACF Release Film
- Light Source COB light source + Fresnel collimating lens
- Print Speed Up to 150mm/h
- Linux OS with 4Gb RAM
- XY Resolution of 18μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 153.36x77.76x165 mm³
- 4.0-inch Capacitive Touch Screen Controller
1,600.00 د.إ.
- غير متوفر حالياً
eSUN
eSUN ePLA-Magic Dark Twinkling
- eSUN ePLA-Magic Dark Twinkling
- Density 1.21 g/cm3
- Tensile Strength 34.18MPa
- Elongation at Break 4.25%
- Flexural Modulus 3459 MPa
- Printing Temp 190- 220℃
- Bed Temp 45-60°C
- Printing Speed 40 - 300mm/s
110.00 د.إ.
- غير متوفر حالياً
ELEGOO
Elegoo Neptune 4 Pro
- Elegoo Neptune 4 PRO 3D Printer
- Build Volume 225*225*265mm
- Print Speed Up to 500 mm/s
- Hotend Max Temp 300 °C
- Build Plate Max Temp 110 °C
- Automatic Levelling over 121 Points
- 4.3" Removable Touch Screen Controller
- Klipper Frimware
- Dual-Drive-Gear Extruder
1,299.00 د.إ.
- غير متوفر حالياً
CREALITY
Creality Ender-3 V3
- CREALITY Ender-3 V3 3D Printer
- Build Volume 220*220*250mm
- Print Speed Up to 600 mm/s
- Hotend Max Temp 300 °C
- Build Plate Max Temp 110 °C
- Automatic Levelling
- 4.3" Touch Screen Controller
- Klipper Frimware
- Layer Height 0.1-0.35mm
1,699.00 د.إ.
- غير متوفر حالياً
CREALITY
Creality Sermoon D3
- CREALITY Sermoon D3
- Build Volume 300*250*300mm
- Print Speed Up to 250 mm/s
- Hotend Max Temp 300 °C
- Build Plate Max Temp 110 °C
- Automatic Levelling With CR-Touch Sensor
- 4.3" Removable Touch Screen Controller
- Layer Height 0.1-0.4mm
9,250.00 د.إ.
CREALITY
Creality HALOT-MAGE PRO
- 10.3-inch 8K mono LCD
- Smart Resin Pump
- FEP Release Film
- Integral Light Source 3.0
- Print Speed Up to 170mm/H
- XY Resolution of 29.7um
- Build Volume of 228x128x230 mm³
- 4.3-inch Capacitive Touch Screen Controller
2,900.00 د.إ.
- غير متوفر حالياً
PHROZEN
Phrozen Sonic Mighty Revo
- 10.1-inch 14K mono LCD
- Build Volume of 22.3x12.6x23.5cm
- ACF Release Film
- Print Speed Up to 450Layers/h
- XY Resolution of 16.8x24µm
- High Speed WiFi Connection
- 5.0-inch Capacitive Touch Screen Controller
- 8GB Internal Storage
3,999.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Kobra 2 Max
- Anycubic Kobra 2 Max 3D Printer
- Build Volume 420*420*500mm
- Print Speed Up to 500 mm/s
- Hotend Max Temp 260 °C
- Build Plate Max Temp 90 °C
- Anycubic LeviQ 2.0 Automatic Leveling 49 Points
- 4.3" Removable Touch Screen Controller
- PEl Magnetic Spring Steel Printing bed
- غير متوفر حالياً
PRUSA
Prusa MK4 3D Printer
- Prusa MK4 3D Printer 3D Printer
- Build Volume 250x210x220mm
- Print Speed Up to 600 mm/s
- Hotend Max Temp 290 °C
- Build Plate Max Temp 120 °C
- Automatic, Mesh Bed Leveling
- 3.5" Removable Touch Screen Controller
- PEl Magnetic Spring Steel Printing bed
4,800.00 د.إ.
BAMBU LAB
Bambu Lab X1-Carbon
- Bambu Lab X1 Carbon 3D printer
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
6,250.00 د.إ.
- غير متوفر حالياً
BAMBU LAB
Bambu Lab X1E
- Bambu Lab X1E 3D printer
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 320 ℃
- Chamber Control Temperature 60℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
13,500.00 د.إ.
- غير متوفر حالياً
BAMBU LAB
Bambu Lab A1 mini Combo
- Bambu Lab A1 mini Combo 3D printer
- Equipped with AMS system
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
2,900.00 د.إ.
- غير متوفر حالياً
ELEGOO
Elegoo Neptune 4 Max
- Elegoo Neptune 4 Max 3D Printer
- Build Volume 420x420x480mm³
- Print Speed Up to 500 mm/s
- Hotend Max Temp 300 °C
- Build Plate Max Temp 85 °C
- Automatic Levelling over 121 Points
- 4.3" Removable Touch Screen Controller
- Klipper Frimware
- Dual-Drive-Gear Extruder
1,699.00 د.إ.
- غير متوفر حالياً
PHROZEN
Phrozen Sonic Mega 8K S
- Phrozen Sonic Mega 8K S
- 15" 8K Mono LCD
- Print Volume: 33x18.5x30cm
- Light Source : 405nm ParaLED Matrix 2.0
- Control Panel 3.5" in Large Touch Panel
- XY Resolution 43 µm
- Layer Thickness 0.01-0.30 mm
- Printing Speed 600 layers/hr
- Release Film ACF Film
- Seamless Integration With Pump & Fill
7,990.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Kobra 2 Pro
- Anycubic Kobra 2 Pro 3D printer
- Maximum Print 250*220*220mm
- Max Speed 500mm/s
- Automatic Leveling LeviQ 2.0
- Max Hotend Temp 260°C
- Max Bed Temp 110°C
- Super Quick 7000rpm/min Cooling fan
- 4.3" LCD Touch-Control Screen
1,350.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Kobra 2 Plus
- Anycubic Kobra 2 Plus 3D printer
- Maximum Print 400x320x320mm
- Max Speed 500mm/s
- Automatic Leveling LeviQ 2.0
- Max Hotend Temp 260°C
- Max Bed Temp 90°C
- Super Quick 7000rpm/min Cooling fan
- 4.3" LCD Touch-Control Screen
1,750.00 د.إ.
- غير متوفر حالياً
ELEGOO
Elegoo Saturn 3 12K
- Elegoo Saturn 3 12K Resin 3D Printer
- 10-inch 12K Mono LCD
- Build Volume of 218.88×122.88×250 mm³
- XY Resolution of 19×24μm
- Light Source COB + Fresnel Collimating Lens
- 3.5-inch Touch Screen Controller
- Layer Thickness 0.01-0.2mm
- Print Speed 70mm/h
1,399.00 د.إ.
- غير متوفر حالياً
CREALITY
Creality HALOT-MAGE
- 10.3-inch 8K mono LCD
- FEP Release Film
- Integral Light Source 3.0
- Print Speed 1~5 Layer/s
- XY Resolution of 29.7um
- Build Volume of 228x128x230 mm³
- 4.3-inch Capacitive Touch Screen Controller
999.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Photon Mono M5s
- Anycubic Photon Mono M5s Resin 3D Printer
- 10.1" monochrome LCD 12K
- Maximum Print Dimmention 200x218x123mm
- Leveling-free Printing Plate
- 4.3" TFT touch-controller
- Light Source LED matrix UV light
- XY Resolution 19*24nm
- Resin Status Detection Sensor
1,499.00 د.إ.