English
العربيةGet Up To 50% OFF New Season Styles, Limited Time Only.
Left Banner
منتجات جديدة
منتجات جديدة
- جديد
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
عامل التصفية النشط
- غير متوفر حالياً
Revopoint
Revopoint POP 3 Standard Edition
- Revopoint POP 3 Standard Edition 3D Scanner
- Accuracy 0.1mm
- 18 fps Smooth Scanning
- Point Distance 0.05mm
- Support Color Scans
- Enhanced Tracking With 4 Infrared LEDs
- Smart Stabilization
- FOV 40x25°
- Maxmium Scan Volume 2500x2500x2500mm
- Light Source : Infrared Fill Lights, White Flash LEDs
- Single Capture 244x180mm at 400mm
- Scanning Environment Indoors and Outdoors
- Output Formats PLY, OBJ, and STL
3,500.00 د.إ.
- غير متوفر حالياً
Polymaker
Polymaker PolyLite ASA
- Polymaker PolyLite ASA Filament
- Weather Resistance
- UV Resistance
- Density 1.13 g/cm3
- Weak Acids Resistant
- Charpy impact strength 10.3±0.4 kJ/m2
- Elongation at break 6.7±0.6%
- Nozzle Temperature 240–260℃
- Build plate temperature 75-95˚C
95.00 د.إ.
- غير متوفر حالياً
BAMBU LAB
Bambu Lab X1-Carbon Combo
- Bambu Lab X1 Carbon COMBO 3D printer
- Equipped with the AMS System
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
6,700.00 د.إ.
- غير متوفر حالياً
Polymaker
Polymaker PolyFlex TPU90
- Polymaker PolyFlex TPU90
- Created from Covestro’s Addigy
- Density 1.12 g/cm3
- Tensile strength 30.0 ± 0.66 MPa
- Elongation at break 528 586.8 ± 15.3 %
- Shore hardness 90A
- Nozzle temperature 210 – 230℃
- Build plate temperature 25~60℃
110.00 د.إ.
- غير متوفر حالياً
Revopoint
Revopoint INSPIRE
- Revopoint INSPIRE 3D Scanner
- Up to 0.2 mm Accuracy
- Scanning Speeds 14 to 18 fps
- Steady Scan With 9-axis IMU
- Point Distance 0.3mm
- Light Source 2 IR LEDS + White LED
- Working Distance 250~500mm
- Single Capture Area : 308*225mm @500mm
1,690.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Kobra 3 Combo
- Anycubic Kobra 3 Combo
- With Multi Filament 3D Priting Anycubic Ace Pro
- Max Print Volume 250*250*260mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 100℃
2,999.00 د.إ.
- غير متوفر حالياً
Polymaker
Polymaker PolyLite PLA
- Polymaker PolyLite PLA Filament
- Density 1.17 g/cm3
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Tensile strength 46.6 ± 0.9 MPa
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- Printing speed 40-60mm/s
60.00 د.إ.
- غير متوفر حالياً
Revopoint
Revopoint RANGE 2
- Revopoint RANGE 2 3D Scanner
- Precision Up to 0.1 mm
- Support Color 3D Scan
- Working Distance 400 - 1300 mm
- Max FOV 860x1380 mm@1300mm
- Working Distance 400 - 1300 mm
- Point Distance Up to 0.1 mm
- Light Source White Light & Infrared
- Output File Formats PLY, OBJ, and STL
- Frame Rate : 16 fps
- Support Wi-Fi 6
3,750.00 د.إ.
- غير متوفر حالياً
ELEGOO
ELEGOO Saturn 4 Ultra
- ELEGOO Saturn 4 Ultra Resin 3D Printer
- 10" Mono LCD 12K
- Resolution 11520*5120
- XY Resolution 19*24um
- Build Volume 218.88*122.88*220mm
- Layer Thickness 0.01-0.2mm
- Printing Speed 150mm/H
- Printing Technology : MSLA Stereo lithography
- Light Source COB + Fresnel Collimating Lens
- PFA release film
- 4-inch capacitive touch screen Controller
- Real-Time AI Monitoring And Time
- Automatic Build Plate Leveling
2,300.00 د.إ.
- غير متوفر حالياً
Polymaker
Polymaker PolyLite Dual Silk PLA
- PolyLite Dual Silk PLA Filament
- Density 1.17 g/cm3
- Tensile strength 46.6 ± 0.9 MPa
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- printing speed 40-60mm/s
99.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Photon Mono M5s Pro
- 10.1-inch 14K Mono LCD
- ACF Release Film
- LED matrix UV light source
- Print Speed Up to 105mm/h
- XY Resolution of 16.8*24.8μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 200x223.78x126.38 mm³
- 4.3-inch Capacitive Touch Screen Controller
- Equipped to Air Heater & Purifier
2,700.00 د.إ.
- غير متوفر حالياً
BAMBU LAB
Bambu Lab P1P
Regular fit, round neckline, short sleeves. Made of extra long staple pima cotton.
3,360.00 د.إ.
- غير متوفر حالياً
eSUN
eSun Luminous-PLA
- eSun Luminous-PLA
- Stunning luminescent effect in low-light
- Enhancing aesthetics and fun
- Density 1.2g/cm3
- Durability 40%
- Tensile Strength 72MPa
- Elongation at Break 11.8%
- IZOD Impact Strength 5.4kJ/㎡
- Extruder Temp 210-230℃
- Bed Temp 45 – 60°C
79.00 د.إ.
- غير متوفر حالياً
BAMBU LAB
Hummingbird printed sweater
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- built-in chamber camera
5,950.00 د.إ.
- غير متوفر حالياً
eSUN
eSun ePLA-Lite
- eSun ePLA-Lite Filament
- A cost-effective choice
- Excellent printability
- Density 1.23 g/cm3
- Tensile Strength 61.34 MPa
- Elongation 29.92%
- Durability 40%
- Extruder Temperature 190 – 230℃
- Bed temperature 45 – 60°C
- Printing Speed 40 – 100mm/s
49.00 د.إ.
- غير متوفر حالياً
BAMBU LAB
Bambu Lab A1 mini
- Bambu Lab A1 mini 3D printer
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
2,250.00 د.إ.
- غير متوفر حالياً
Revopoint
Revopoint POP 3 PLUS Advanced
- Revopoint POP 3 PLUS Advanced
- With mini Turntable
- Accuracy up to 0.08 mm
- Single-frame Precision, up to 0.04 mm
- Working Distance 150 ~ 400 mm
- FOV 244 x 180 mm at 400mm
- Minimum Scan Volume 20x20x20mm
- Maximum Scan Volume 2×2×2m
- Scanning Speed up to 18 fps
- Support Color Scanning
- Tracking Methods Feature, Marker
- Light Source Class 1 InfraredLight
- Position Sensors 9-axis IMU
- Output File Formats PLY, OBJ, STL, ASC, 3MF, GLTF, FBX
- Wi-Fi 6,Bluetooth 4.1
3,299.00 د.إ.
- غير متوفر حالياً
eSUN
eSun eABS Max
- eSun eABS Max
- High impact resistance
- High toughness
- Antiflaming
- Density 1.05 g/cm3
- Tensile Strength 45MPa
- Elongation at Break 30%
- Flexural Strength 58MPa
- Extruder Temperature 240 – 270℃
- Bed temperature 95 – 110°C
- Printing Speed 40 – 100mm/s
77.00 د.إ.
- غير متوفر حالياً
BAMBU LAB
Bambu Lab P1S
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
3,300.00 د.إ.
- غير متوفر حالياً
Revopoint
Revopoint POP 3 PLUS Premium
- Revopoint POP 3 PLUS Premium
- With Dual-Axis Turntable and Hanheld Stabilizer
- Accuracy up to 0.08 mm
- Single-frame Precision, up to 0.04 mm
- Working Distance 150 ~ 400 mm
- FOV 244 x 180 mm at 400mm
- Minimum Scan Volume 20x20x20mm
- Maximum Scan Volume 2×2×2m
- Scanning Speed up to 18 fps
- Support Color Scanning
- Tracking Methods Feature, Marker
- Light Source Class 1 InfraredLight
- Position Sensors 9-axis IMU
- Output File Formats PLY, OBJ, STL, ASC, 3MF, GLTF, FBX
- Wi-Fi 6,Bluetooth 4.1
3,999.00 د.إ.
