English
العربيةGet Up To 50% OFF New Season Styles, Limited Time Only.
Left Banner
منتجات جديدة
منتجات جديدة
- جديد
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
عامل التصفية النشط
- جديد
- غير متوفر حالياً
BAMBU LAB
Bambu Lab AMS HT
- 85°C high-temperature filament drying
- Electro-magnetic automatic air vent
- Air-tight long-term filament storage
- Auto-rotate drying for even results
- RFID auto-sync for filament settings
- Brushless motor with 60% faster feeding
- Supports up to 24-color printing
- Bypass outlet for soft/brittle filaments
- Ceramic inlet with 1200HV durability
- Real-time temp & humidity display
- Active moisture discharge system
- Compatible with all Bambu printers
- غير متوفر حالياً
Polymaker
Polymaker PolyLite ASA
- Polymaker PolyLite ASA Filament
- Weather Resistance
- UV Resistance
- Density 1.13 g/cm3
- Weak Acids Resistant
- Charpy impact strength 10.3±0.4 kJ/m2
- Elongation at break 6.7±0.6%
- Nozzle Temperature 240–260℃
- Build plate temperature 75-95˚C
95.00 د.إ.
- غير متوفر حالياً
Polymaker
Polymaker PolyFlex TPU90
- Polymaker PolyFlex TPU90
- Created from Covestro’s Addigy
- Density 1.12 g/cm3
- Tensile strength 30.0 ± 0.66 MPa
- Elongation at break 528 586.8 ± 15.3 %
- Shore hardness 90A
- Nozzle temperature 210 – 230℃
- Build plate temperature 25~60℃
110.00 د.إ.
- غير متوفر حالياً
Polymaker
Polymaker PolyLite PLA
- Polymaker PolyLite PLA Filament
- Density 1.17 g/cm3
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Tensile strength 46.6 ± 0.9 MPa
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- Printing speed 40-60mm/s
60.00 د.إ.
- غير متوفر حالياً
Polymaker
Polymaker PolyLite Dual Silk PLA
- PolyLite Dual Silk PLA Filament
- Density 1.17 g/cm3
- Tensile strength 46.6 ± 0.9 MPa
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- printing speed 40-60mm/s
99.00 د.إ.