English
العربيةGet Up To 50% OFF New Season Styles, Limited Time Only.
Left Banner
منتجات جديدة
منتجات جديدة
- جديد
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
عامل التصفية النشط
- غير متوفر حالياً
Polymaker
Polymaker PolyLite ASA
- Polymaker PolyLite ASA Filament
- Weather Resistance
- UV Resistance
- Density 1.13 g/cm3
- Weak Acids Resistant
- Charpy impact strength 10.3±0.4 kJ/m2
- Elongation at break 6.7±0.6%
- Nozzle Temperature 240–260℃
- Build plate temperature 75-95˚C
95.00 د.إ.
- غير متوفر حالياً
Polymaker
Polymaker PolyFlex TPU90
- Polymaker PolyFlex TPU90
- Created from Covestro’s Addigy
- Density 1.12 g/cm3
- Tensile strength 30.0 ± 0.66 MPa
- Elongation at break 528 586.8 ± 15.3 %
- Shore hardness 90A
- Nozzle temperature 210 – 230℃
- Build plate temperature 25~60℃
110.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Kobra 3 Combo
- Anycubic Kobra 3 Combo
- With Multi Filament 3D Priting Anycubic Ace Pro
- Max Print Volume 250*250*260mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 100℃
2,999.00 د.إ.
- غير متوفر حالياً
Polymaker
Polymaker PolyLite PLA
- Polymaker PolyLite PLA Filament
- Density 1.17 g/cm3
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Tensile strength 46.6 ± 0.9 MPa
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- Printing speed 40-60mm/s
60.00 د.إ.
- غير متوفر حالياً
Polymaker
Polymaker PolyLite Dual Silk PLA
- PolyLite Dual Silk PLA Filament
- Density 1.17 g/cm3
- Tensile strength 46.6 ± 0.9 MPa
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- printing speed 40-60mm/s
99.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Photon Mono M5s Pro
- 10.1-inch 14K Mono LCD
- ACF Release Film
- LED matrix UV light source
- Print Speed Up to 105mm/h
- XY Resolution of 16.8*24.8μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 200x223.78x126.38 mm³
- 4.3-inch Capacitive Touch Screen Controller
- Equipped to Air Heater & Purifier
2,700.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Kobra 2 Max
- Anycubic Kobra 2 Max 3D Printer
- Build Volume 420*420*500mm
- Print Speed Up to 500 mm/s
- Hotend Max Temp 260 °C
- Build Plate Max Temp 90 °C
- Anycubic LeviQ 2.0 Automatic Leveling 49 Points
- 4.3" Removable Touch Screen Controller
- PEl Magnetic Spring Steel Printing bed
- غير متوفر حالياً
ANYCUBIC
Anycubic Kobra 2 Pro
- Anycubic Kobra 2 Pro 3D printer
- Maximum Print 250*220*220mm
- Max Speed 500mm/s
- Automatic Leveling LeviQ 2.0
- Max Hotend Temp 260°C
- Max Bed Temp 110°C
- Super Quick 7000rpm/min Cooling fan
- 4.3" LCD Touch-Control Screen
1,350.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Kobra 2 Plus
- Anycubic Kobra 2 Plus 3D printer
- Maximum Print 400x320x320mm
- Max Speed 500mm/s
- Automatic Leveling LeviQ 2.0
- Max Hotend Temp 260°C
- Max Bed Temp 90°C
- Super Quick 7000rpm/min Cooling fan
- 4.3" LCD Touch-Control Screen
1,750.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Photon Mono M5s
- Anycubic Photon Mono M5s Resin 3D Printer
- 10.1" monochrome LCD 12K
- Maximum Print Dimmention 200x218x123mm
- Leveling-free Printing Plate
- 4.3" TFT touch-controller
- Light Source LED matrix UV light
- XY Resolution 19*24nm
- Resin Status Detection Sensor
1,499.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Kobra 2 Neo
- Anycubic Kobra 2 Neo 3D Printer
- Printing Volume 250*220*220mm
- Max Printing Speed 250mm/s
- Automatic Bed Leveling LeviQ 2.0 25 Points
- Max Nozzle Temp 260°C
- Max Bed Temp 110°C
- 2.4" LCD Knob-Control
850.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Kobra 3
- Anycubic Kobra 3
- Max Print Volume 250*250*260mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 100℃
- 4.3-inch Touch Controller
- Hardened Steel Extruder Gear
- Automatic hot bed leveling
- Quick Swap Nozzle
1,990.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Photon Mono 4
- Anycubic Photon Mono 4 Resin 3D Printer
- 7 Inches 10K Monochrome LCD
- Resolution 9024x5120 Pixel
- Xy resolution 17*17μm
- 2.8" Touch Screen Controller
- Light intensity ~3000μW /cm²
- 4-point manual Printing Plate leveling
- LighTurbo Light Source
- Max Printing Volume 153.4*87*165mm
- Layer height 0.03-0.15mm
- Printing Speed up to 70mm/h
799.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Photon Mono 4 Ultra
- Anycubic Photon Mono 4 Ultra
- 7 Inches 10K MonoChrome LCD
- XY 17*17μm
- Printing Speed Up to 80-120mm/h
- Priting Volume 153.4*87*165 mm
- COB Light Source
- ACF Release Film
- 4 Point Manual Leveling
- WiFi6 and Lan Connectivity
- 4.3Inch Touch screen controller
- Internal Air Purifier
999.00 د.إ.
- غير متوفر حالياً
FLSUN
FLSUN S1 PRO
- FLSUN S1 PRO 3D Printer
- Max Printing Speed 1200mm/s
- Max Build Volume Φ320*430mm
- Fine Printing with FLSUN Algorithms 2.0 and AI Inspection
- Fully Automatic Leveling
- Quieter down to 55dB
- Max Nozzle Temp 350℃
- Max Bed Temp 120℃
- Dual-Gear Direct Drive Extruder
- Printing Accuracy 0.1mm
- Layer Height 0.1-0.35mm
6,990.00 د.إ.
- غير متوفر حالياً
ANYCUBIC
Anycubic Kobra S1
- Anycubic Kobra S1
- Print Volume 250*250*250mm
- Printing Speed up to 600mm/s
- Ultra-Quiet Printing 33dB
- Compatible with PLA, PETG, TPU，ABS, ASA
- Nozzle temperature 320°C
- Hotbed temperature 120℃
3,350.00 د.إ.