• 288Wh compact high-efficiency battery
• 600W output, 1500W surge capability
• ≤10ms UPS seamless power switching
• 140W USB-C PD fast charging
• UltraCell™ energy-saving technology
• TurboBoost fast recharge (45 mins to 80%)
• 8 versatile output ports
• Lightweight 4.3 kg portable design
• Whisper-quiet <30dB operation
• 3,000+ cycle LiFePO₄ battery
• Smart app control via WiFi & Bluetooth
• Supports solar charging up to 200W
• Advanced BMS safety protection
• Durable ABS construction

• 3,014Wh long-life LiFePO₄ battery
• 2,400W output, 4,800W surge power
• World’s smallest 3kWh power station
• 21% lighter than similar 3kWh units
• 12V/30A DC port for campervan use
• 2,300W ultra-fast AC charging
• Up to 1,200W solar charging input
• Supports combined AC + DC charging
• 10ms UPS instant backup switching
• Bluetooth & Wi-Fi smart app control
• 6,000+ battery cycles to 80%
• Compact and travel-friendly design
• Pass-through charging supported
• 5-year official warranty coverage

• 2,764.8Wh base battery, expandable to 58kWh
• 3,840W output with 7,680W surge power
• Expandable output up to 11.52kW
• 20ms UPS seamless backup switching
• Industry-first 12kW bypass support
• Up to 19.2kW solar input support
• 2,400W fast solar charging input
• LiFePO₄ battery with 6,000+ cycles
• Up to 17 years battery lifespan
• Smart app control via Wi-Fi & Bluetooth
• Supports home, RV, and off-grid use
• Ultra-low self-consumption design
• Fast AC and generator charging
• Durable compact premium build
• 5-year official BLUETTI warranty

• Compatible with Anycubic Kobra X
• Strong adhesion at low temperature (45°C)
• Reduces warping and layer separation
• Energy-efficient low power consumption
• Durable surface with long lifespan
• Only 20% adhesion loss over time
• Matte finish for smooth first layer
• No glue or adhesive required
• Easy cleaning with water only
• Optimized for PLA and PETG printing

• Compatible with Anycubic Kobra X
• Multiple nozzle sizes: 0.25 / 0.4 / 0.6 / 0.8mm
• High precision printing performance
• Durable hardened steel construction
• Ideal for abrasive filaments
• Improved wear resistance and longevity
• Supports fine detail and high-speed printing
• Easy installation and replacement

• Fully enclosed chamber for stable printing
• Quad independent toolheads (4 nozzles)
• Up to 500% faster print performance
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera remote monitoring
• WiFi, LAN & USB connectivity

• Real-time monitoring of print progress
• Compatible with Flashforge AD5X
• Easy installation and quick setup
• Remote viewing from anywhere
• Improves print reliability and success
• Ideal for long-duration prints
• Reduces material waste and failures
• Clear and stable video quality
• Supports workflow optimization
• Smart upgrade for better control

• Compatible with Flashforge AD5X series
• Available in PEI and PC sheet options
• Supports PLA PETG ABS ASA TPU materials
• Textured smooth and matte surface options
• Excellent first layer adhesion performance
• Easy model removal after cooling
• Durable and long-lasting build surface
• Resistant to scratches and wear
• Uniform heat distribution across plate
• Flexible plate for easy print removal
• Ideal for both upgrade and replacement
• Easy cleaning and low maintenance design

• Smart auto-focus system for perfect results
• Foldable design for easy transport
• Lightweight yet strong aluminum frame
• Vibration-free stable engraving platform
• Quick and tool-free setup
• Optimized for LP1 Pro & LP1 Plus
• Enhances engraving precision and consistency

• Quad independent toolheads (4 nozzles)
• Up to 500% faster printing speed
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera for monitoring
• WiFi, LAN & USB connectivity
• PEI flexible steel build plate
• Supports engineering-grade filaments

• High precision nozzle for detailed prints
• 50W heater, 200°C in 35 seconds
• 32mm³/s high flow extrusion
• Quick-swap nozzle in 3 seconds
• Clog-resistant internal design
• Durable, wear-resistant materials
• Supports up to 280°C printing
• Multiple nozzle sizes available
• Perfect fit for AD5M / AD5X
• Easy installation and maintenance

• Magnetic safety shield for LP1 Pro / LP1 Plus
• Blocks violet & blue laser wavelengths
• Filters infrared laser light exposure
• Orange optical acrylic for clear visibility
• Magnetic attachment for quick installation
• Lightweight durable acrylic construction
• Impact-resistant protective design
• Improves laser engraving safety
• Ideal for open workspace engraving
• Designed for LaserPecker portable engravers

• 600mW 405nm Diode Laser Precision
• Ultra Portable Pocket-Size Design
• Weight Only 210g Laser Module
• 2-Minute Quick Setup Engraving
• 600mm/s Maximum Engraving Speed
• 100 × 100 mm Working Area
• Adjustable Multi-Angle Stand
• Bluetooth Mobile App Control
• Works with iOS & Android Devices
• USB-C Power via Power Bank
• Engraves Wood, Leather & Plastic
• Built-in Design Library in App
• Optional Auto-Focus Smart Stand
• Durable Aluminum Alloy Structure

• 10W UV Laser, 355nm cold engraving technology
• Ultra-fine 0.005 mm laser spot precision
• Up to 10,000 mm/s high-speed engraving
• 16K ultra-high resolution engraving quality
• Cold laser process, no burn or heat damage
• Supports metal, glass, acrylic, wood, plastics
• 200+ color engraving on metal surfaces
• Advanced 3D relief engraving capability
• HD camera positioning system built-in
• Smart batch engraving workflow support
• Compatible with professional LightBurn software
• Compact enclosed design for safer operation
• Optional rotary attachment for round objects
• High stability industrial-grade UV laser source

• 3-in-1 Laser Welding, Cutting, Cleaning
• 700W Fiber Laser Source
• Welding Thickness up to 3 mm
• Minimal Heat-Affected Zone 0.05 mm
• 7" Smart Touchscreen Control
• Single / Dual Wire Feeding Support
• Portable 21 kg Industrial Design
• Wide Voltage Input 100–250V
• Continuous 24/7 Operation Capability
• Compatible with Multiple Metals

• 14-inch 12K LCD for ultra-fine details
• 24.8 μm XY resolution for precision prints
• Large build size: 285.5 × 214 × 300 mm
• Massive 18.3L printing volume
• Advanced COB + Fresnel light source
• LightTurbo 4.0 uniform light technology
• Intelligent Auto-Leveling 3.0 system
• Precision C7-grade ball screw Z-axis
• Remote control via App & camera monitoring
• Large 1900 ml resin vat capacity

• ليزر مزدوج 20W دايود + 20W فايبر
• نقش المعادن والمواد غير المعدنية
• سرعة نقش قصوى حتى 10000 مم/ث
• مساحة عمل حتى 160×300 مم مع Slide
• نقش أسطواني مع Rotary Extension
• قطر نقش دوار أقصى 200 مم
• عمق قطع معادن حتى 1 مم
• قطع خشب حتى 20 مم
• قطع أكريليك أسود حتى 15 مم
• ارتفاع معالجة أقصى 137 مم
• دقة نقش عالية للاستخدام الاحترافي
• تصميم مدمج وخفيف الوزن
• وزن إجمالي للنظام 6.02 كجم
• تحكم عبر الكمبيوتر والهاتف
• مناسب للأعمال والإنتاج التجاري

• حجم بناء 260 × 260 × 260 مم
• نظام طباعة مدمج بأربعة ألوان
• قابل للتوسعة حتى 19 لونًا
• تقنية الطباعة متعددة الألوان ACE GEN 2
• تقليل هدر تبديل الفتيل بنسبة ‎81.25%‎
• سرعة طباعة افتراضية 300 مم/ث
• سرعة طباعة قصوى 600 مم/ث
• تسارع أقصى 20,000 مم/ث²
• معايرة تلقائية LeviQ 3.0 بـ49 نقطة
• نظام بثق مباشر عالي الدقة
• يدعم PLA وPETG وTPU وASA
• كشف ذكي لأخطاء الطباعة بالذكاء الاصطناعي
• كاميرا 720P للمراقبة المباشرة
• تشغيل هادئ للغاية ≤48 ديسيبل