وصل حديثاً
عامل التصفية النشط
eSUN
eSun eABS Max
- eSun eABS Max
- High impact resistance
- High toughness
- Antiflaming
- Density 1.05 g/cm3
- Tensile Strength 45MPa
- Elongation at Break 30%
- Flexural Strength 58MPa
- Extruder Temperature 240 – 270℃
- Bed temperature 95 – 110°C
- Printing Speed 40 – 100mm/s
77.00 د.إ.
eSUN
eSun ePLA-Lite
- eSun ePLA-Lite Filament
- A cost-effective choice
- Excellent printability
- Density 1.23 g/cm3
- Tensile Strength 61.34 MPa
- Elongation 29.92%
- Durability 40%
- Extruder Temperature 190 – 230℃
- Bed temperature 45 – 60°C
- Printing Speed 40 – 100mm/s
49.00 د.إ.
ELEGOO
ELEGOO Mars 5
- ELEGOO Mars 5 3D Printer
- 6.6-Inch 4K Mono LCD
- Full Automatic Leveling
- Build Volume 143.43x89.6x150mm
- Printing Speed 70mm/h
- Layer Thickness 0.01-0.2mm
- Resolution 4098x2560
- XY Resolution 35x35μm
- COB Light Source
- Z Axis Accuracy 0.02mm
- One-Click Self-Check System
1,150.00 د.إ.
ELEGOO
ELEGOO Mars 5 Ultra
- ELEGOO Mars 5 Ultra 3D Printer
- 7-inch 9K Mono LCD
- Printing Speed 150mm/h
- Resolution 8520x4320
- XY Resolution 18x18μm
- Smart Printing with AI Camera
- Automatic Build Plate Leveling
- Layer Thickness 0.01-0.2mm
- 9H Screen Protector
- 4.0-inch Capacitive Touch Screen Controller
- Z-AXIS Accuracy 0.02mm
- Real-Time Monitoring
1,300.00 د.إ.
CREALITY
Creality K1 SE
- Creality K1 SE 3D Printer
- Build Volume 220*220*250mm
- Printing Speed 600mm/s
- Printing Accuracy 100±0.1mm
- Nozzle Temperature ≤300℃
- Heatbed Temperature ≤100℃
- Layer Height 0.1-0.35mm
- 4.3" Touch Screen Controller
- Built in wifi
- Fully Automatic Leveling
- Power Loss Recover
- Slicing Software Creality Print 5.0, Cura, PrusaSlicer
2,750.00 د.إ.
eSUN
eSun Luminous-PLA
- eSun Luminous-PLA
- Stunning luminescent effect in low-light
- Enhancing aesthetics and fun
- Density 1.2g/cm3
- Durability 40%
- Tensile Strength 72MPa
- Elongation at Break 11.8%
- IZOD Impact Strength 5.4kJ/㎡
- Extruder Temp 210-230℃
- Bed Temp 45 – 60°C
79.00 د.إ.
CREALITY
Creality CR PETG
- Creality CR PETG Filament
- Excellent stability and moisture resistance
- Transparent and Glossy
- Mutiple colors
- Simple operation & Wide Range Compatibility
- Printing temperature: 230-250℃
- Tensile strength: 49 MPa
115.00 د.إ.
PHROZEN
Phrozen Castable Jewelry 3D Printing Resin
- Phrozen Castable Jewelry 3D Printing Resin
- Surface Hardness: 76 Shore D
- Tensile Stress at Break: 25.1 MPa
- Elongation at Break, EAB: 20.63 %
- Notched Izod Impact:28.98 J/m
- Specifically designed for casting
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution:0.050 mm
499.00 د.إ.
BAMBU LAB
Bambu Lab PLA Matte
- Bambu Lab PLA Matte
- Matte Surface Texture
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Compatible With All kind of 3D Printer
- Density 1.24 g/cm3
135.00 د.إ.
BAMBU LAB
Bambu Lab PLA Metal
- Bambu Lab PLA Metal
- Metal Surface Texture & Metallic Shine
- High impact strength
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Compatible With All kind of 3D Printer
- Density 1.24 g/cm3
150.00 د.إ.
BAMBU LAB
Bambu Lab PLA CMYK Lithophane Bundle
- Bambu Lab PLA CMYK Lithophane Bundle
- MakeMake Colorful 3D Models
- Include Jade White,Basic Yellow,Basic Magenta,Basic Cyan
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Compatible With All kind of 3D Printer
- Density 1.24 g/cm3
355.00 د.إ.
ELEGOO
ELEGOO Silk PLA
- ELEGOO ELEGOO Silk PLA
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
75.00 د.إ.
ELEGOO
ELEGOO PLA Special Colored
- ELEGOO PLA Special Colored
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
75.00 د.إ.
ELEGOO
ELEGOO PLA Filament
- ELEGOO PLA Filament
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
66.00 د.إ.
eSUN
eSun ePLA-Silk Mystic
- eSun ePLA-Silk Mystic
- Mystery Three-color
- Silk glossy texture
- Excellent printability
- Prop Extruder Temp 190 – 230℃
- Prop Bed Temp 45 – 60°C
- Tensile Strength 57.64 MPa
- Density 1.256 g/cm3
- Flexural Strength Mpa
115.00 د.إ.
BAMBU LAB
Bambu Temperature Plate Smooth PEI
- Bambu Temperature Plate Smooth PEI
- Surface temperature resistance Up to 120℃
- Spring steel thickness 0.4 mm
- Usable print size 256*256 mm
- Excellent adhesion
- Works well with the Automatic Calibration
- Can be replaced by the user
399.00 د.إ.
eSUN
eSun ePLA-Matte
- eSun ePLA-Matte Filament
- Matte surface effect
- High-speed printing
- Easy to peel off the support
- Excellent printability
- Prop Bed Temp 45~60
- Prop Extruder Temp 190~230
- Density 1.329 g/cm³
- Elongation at break 50%
95.00 د.إ.
ELEGOO
ELEGOO OrangeStorm Giga
- ELEGOO OrangeStorm Giga
- Build Volume 800x800x1000mm
- Printing Speed 300mm/s
- Multi-Nozzle Printing
- Portable 7-inch Controller
- Multi link Printing Plate
- Max Bed Temp 90°C
- Max Extruder Temp 300℃
13,700.00 د.إ.
FLASHFORGE
FlashForge Adventurer 5M
- FlashForge Adventurer 5M 3D Printer
- Build Volume 220*220*220mm
- Printing Speed 600mm/s
- Max Extruder Temp 280℃
- Max Bed Temp 110 ℃
- Layer Thickness 0.1-0.4 mm
- Print Precision ±0.2 mm
2,390.00 د.إ.
PHROZEN
Phrozen Sonic Mighty 12K
- Phrozen Sonic Mighty 12K
- 10.1 inch 12K mono LCD
- Build Volume 218x123x235mm
- XY Resolution of 19x24μm
- Printing Speed 400 layers/hr
- 5 inch touchscreen Controller
- Release Film nFEP Film
- Light Source Linear ProjectionLED
- Laser cut build Plate
3,900.00 د.إ.