English
العربيةGet Up To 50% OFF New Season Styles, Limited Time Only.
Left Banner
منتجات جديدة
منتجات جديدة
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
وصل حديثاً
عامل التصفية النشط
- جديد
- غير متوفر حالياً
Revopoint
Revopoint Miraco Calibration Board
- Revopoint Miraco Calibration Board
- Compatible With INSPIRE、MIRACO 3D Scanner
- Material PVC
177.00 د.إ.
- جديد
- غير متوفر حالياً
Revopoint
Revopoint Screen Protector for MIRACO
- Revopoint Screen Protector for MIRACO
- Impact-resistant
- Fuly Transparent
99.00 د.إ.
- جديد
- غير متوفر حالياً
Revopoint
Revopoint MIRACO Protective Case & Screen...
- Revopoint MIRACO Protective Case
- With Glass Screen Protector
- Protect From Scratchs
155.00 د.إ.
- جديد
- غير متوفر حالياً
Jamg HE
JAMG HE High Temperature Resistance Resin
- JAMG HE High Temperature Resistance Resin
- Super Hardness(Shore D): 88D
- Anti- High temperature 220°C
- Compatible With 405nm Resin 3D Printers
315.00 د.إ.
- جديد
- غير متوفر حالياً
Jamg HE
JAMG HE X Cast Resin
- JAMG HE X Cast Resin
- Sutible for jewelry or silver & gold casting
- High detail prints
- Easy cleaning
- Super casting
- Easy to set diamond or stone
- Weight 1000g
650.00 د.إ.
- جديد
- غير متوفر حالياً
Jamg HE
JAMG HE Ultra Cast Resin
- JAMG HE Ultra Cast Resin
- Easy printing
- 90% wax resin
- Extremely easy casting
- No casting skill required
555.00 د.إ.
- جديد
- غير متوفر حالياً
Jamg HE
JAMG HE Water Washable ABS Like Resin
- JAMG HE Water Washable ABS Like Resin
- Fast Curing
- Good Process Performance
- Low Viscosity
- Advantage of improved formulation
- Low Odour And Easy to Clean
0.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyLite Dual Silk PLA
- PolyLite Dual Silk PLA Filament
- Density 1.17 g/cm3
- Tensile strength 46.6 ± 0.9 MPa
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- printing speed 40-60mm/s
99.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyLite PLA
- Polymaker PolyLite PLA Filament
- Density 1.17 g/cm3
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Tensile strength 46.6 ± 0.9 MPa
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- Printing speed 40-60mm/s
60.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyFlex TPU90
- Polymaker PolyFlex TPU90
- Created from Covestro’s Addigy
- Density 1.12 g/cm3
- Tensile strength 30.0 ± 0.66 MPa
- Elongation at break 528 586.8 ± 15.3 %
- Shore hardness 90A
- Nozzle temperature 210 – 230℃
- Build plate temperature 25~60℃
110.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyLite ASA
- Polymaker PolyLite ASA Filament
- Weather Resistance
- UV Resistance
- Density 1.13 g/cm3
- Weak Acids Resistant
- Charpy impact strength 10.3±0.4 kJ/m2
- Elongation at break 6.7±0.6%
- Nozzle Temperature 240–260℃
- Build plate temperature 75-95˚C
95.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolySonic PLA
- Polymaker PolySonic PLA
- High-speed 3D printing filament
- Nozzle Temp 210~230°C
- Bed Temp 30~60°C
- Printing Speed up to 300mm/s
- Density 1.23 g/cm3
- Glass transition temperature 59°C
59.00 د.إ.
- جديد
- غير متوفر حالياً
Revopoint
Revopoint INSPIRE
- Revopoint INSPIRE 3D Scanner
- Up to 0.2 mm Accuracy
- Scanning Speeds 14 to 18 fps
- Steady Scan With 9-axis IMU
- Point Distance 0.3mm
- Light Source 2 IR LEDS + White LED
- Working Distance 250~500mm
- Single Capture Area : 308*225mm @500mm
1,690.00 د.إ.
- جديد
- غير متوفر حالياً
PHROZEN
Phrozen Castable Jewelry 3D Printing Resin
- Phrozen Castable Jewelry 3D Printing Resin
- Surface Hardness: 76 Shore D
- Tensile Stress at Break: 25.1 MPa
- Elongation at Break, EAB: 20.63 %
- Notched Izod Impact：28.98 J/m
- Specifically designed for casting
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
499.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyLite PETG
- Polymaker PolyLite PETG
- Density 1.25 g/cm3
- Tensile strength 31.9 MPa
- Elongation at break 6.8 %
- Printing Temperature 230˚C - 240˚C
- Bed Temperature 70˚C - 80˚C
99.00 د.إ.