English
العربيةGet Up To 50% OFF New Season Styles, Limited Time Only.
Left Banner
منتجات جديدة
منتجات جديدة
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
وصل حديثاً
عامل التصفية النشط
- جديد
- غير متوفر حالياً
eSUN
eSun eABS Max
- eSun eABS Max
- High impact resistance
- High toughness
- Antiflaming
- Density 1.05 g/cm3
- Tensile Strength 45MPa
- Elongation at Break 30%
- Flexural Strength 58MPa
- Extruder Temperature 240 – 270℃
- Bed temperature 95 – 110°C
- Printing Speed 40 – 100mm/s
77.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSun ePLA-Lite
- eSun ePLA-Lite Filament
- A cost-effective choice
- Excellent printability
- Density 1.23 g/cm3
- Tensile Strength 61.34 MPa
- Elongation 29.92%
- Durability 40%
- Extruder Temperature 190 – 230℃
- Bed temperature 45 – 60°C
- Printing Speed 40 – 100mm/s
49.00 د.إ.
- جديد
- غير متوفر حالياً
ELEGOO
ELEGOO Mars 5
- ELEGOO Mars 5 3D Printer
- 6.6-Inch 4K Mono LCD
- Full Automatic Leveling
- Build Volume 143.43x89.6x150mm
- Printing Speed 70mm/h
- Layer Thickness 0.01-0.2mm
- Resolution 4098x2560
- XY Resolution 35x35μm
- COB Light Source
- Z Axis Accuracy 0.02mm
- One-Click Self-Check System
1,150.00 د.إ.
- جديد
ELEGOO
ELEGOO Mars 5 Ultra
- ELEGOO Mars 5 Ultra 3D Printer
- 7-inch 9K Mono LCD
- Printing Speed 150mm/h
- Resolution 8520x4320
- XY Resolution 18x18μm
- Smart Printing with AI Camera
- Automatic Build Plate Leveling
- Layer Thickness 0.01-0.2mm
- 9H Screen Protector
- 4.0-inch Capacitive Touch Screen Controller
- Z-AXIS Accuracy 0.02mm
- Real-Time Monitoring
1,300.00 د.إ.
- جديد
- غير متوفر حالياً
CREALITY
Creality K1 SE
- Creality K1 SE 3D Printer
- Build Volume 220*220*250mm
- Printing Speed 600mm/s
- Printing Accuracy 100±0.1mm
- Nozzle Temperature ≤300℃
- Heatbed Temperature ≤100℃
- Layer Height 0.1-0.35mm
- 4.3" Touch Screen Controller
- Built in wifi
- Fully Automatic Leveling
- Power Loss Recover
- Slicing Software Creality Print 5.0, Cura, PrusaSlicer
2,750.00 د.إ.
- جديد
- غير متوفر حالياً
eSUN
eSun Luminous-PLA
- eSun Luminous-PLA
- Stunning luminescent effect in low-light
- Enhancing aesthetics and fun
- Density 1.2g/cm3
- Durability 40%
- Tensile Strength 72MPa
- Elongation at Break 11.8%
- IZOD Impact Strength 5.4kJ/㎡
- Extruder Temp 210-230℃
- Bed Temp 45 – 60°C
79.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyLite Dual Silk PLA
- PolyLite Dual Silk PLA Filament
- Density 1.17 g/cm3
- Tensile strength 46.6 ± 0.9 MPa
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- printing speed 40-60mm/s
99.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyLite PLA
- Polymaker PolyLite PLA Filament
- Density 1.17 g/cm3
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Tensile strength 46.6 ± 0.9 MPa
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- Printing speed 40-60mm/s
60.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyFlex TPU90
- Polymaker PolyFlex TPU90
- Created from Covestro’s Addigy
- Density 1.12 g/cm3
- Tensile strength 30.0 ± 0.66 MPa
- Elongation at break 528 586.8 ± 15.3 %
- Shore hardness 90A
- Nozzle temperature 210 – 230℃
- Build plate temperature 25~60℃
110.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyLite ASA
- Polymaker PolyLite ASA Filament
- Weather Resistance
- UV Resistance
- Density 1.13 g/cm3
- Weak Acids Resistant
- Charpy impact strength 10.3±0.4 kJ/m2
- Elongation at break 6.7±0.6%
- Nozzle Temperature 240–260℃
- Build plate temperature 75-95˚C
95.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolySonic PLA
- Polymaker PolySonic PLA
- High-speed 3D printing filament
- Nozzle Temp 210~230°C
- Bed Temp 30~60°C
- Printing Speed up to 300mm/s
- Density 1.23 g/cm3
- Glass transition temperature 59°C
59.00 د.إ.
- جديد
- غير متوفر حالياً
CREALITY
Creality CR PETG
- Creality CR PETG Filament
- Excellent stability and moisture resistance
- Transparent and Glossy
- Mutiple colors
- Simple operation & Wide Range Compatibility
- Printing temperature: 230-250℃
- Tensile strength: 49 MPa
115.00 د.إ.
- جديد
- غير متوفر حالياً
ANYCUBIC
Anycubic High Clear Resin
- Anycubic High Clear Resin
- Density 1.05-1.25g/cm³
- Elongation at break 14.6%
- Hardness 78D
- Tensile strength 28.1 MPa
- Molding shrinkage 3.72-4.24%
- Prevents Yellowing
- Durable and Robust
- Mild Scent and Safe
225.00 د.إ.
- جديد
- غير متوفر حالياً
PHROZEN
Phrozen Castable Jewelry 3D Printing Resin
- Phrozen Castable Jewelry 3D Printing Resin
- Surface Hardness: 76 Shore D
- Tensile Stress at Break: 25.1 MPa
- Elongation at Break, EAB: 20.63 %
- Notched Izod Impact：28.98 J/m
- Specifically designed for casting
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
499.00 د.إ.
- جديد
- غير متوفر حالياً
ANYCUBIC
Anycubic Tough Resin Ultra
- Anycubic Tough Resin Ultra
- Density 1.05-1.25g/cm³
- Elongation at break 70-80%
- Flexural strength 15-25 MPa
- Hardness 71-75D
- Strong lmpact Resistance
- Flexible with Excellent Rebound
199.00 د.إ.
- جديد
- غير متوفر حالياً
ANYCUBIC
Anycubic Tough Resin 2.0
- Anycubic Tough Resin 2.0
- Density 1.10-1.15g/cm³
- Elongation at break 30-50%
- Hardness 76 Shore D
- Viscosity 150-250MPa·s（25℃）
- Heat deflection temp>60-65℃
- Exceptional Toughness & Resistant to Breakage
- Strong Elongation & High Flexibility
- High Precision, Minimal Shrinkage
199.00 د.إ.
- جديد
- غير متوفر حالياً
ANYCUBIC
Anycubic Standard Resin V2
- Anycubic Standard Resin V2
- Superior Strength and Durability
- Elongation at break 25-30%
- Density 1.05-1.25g/cm³
- Viscosity 250-350 cP·mPa·s
- Hardness 80-83D
- Flexural modulus 1500-2100 MPa
- Resin wash Alcohol
- Exceptional Precision with Minimal Distortion
- High Impact Resistance and Broad Compatibility
180.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyLite PETG
- Polymaker PolyLite PETG
- Density 1.25 g/cm3
- Tensile strength 31.9 MPa
- Elongation at break 6.8 %
- Printing Temperature 230˚C - 240˚C
- Bed Temperature 70˚C - 80˚C
99.00 د.إ.