English
العربيةGet Up To 50% OFF New Season Styles, Limited Time Only.
Left Banner
منتجات جديدة
منتجات جديدة
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
- جديد
- غير متوفر حالياً
وصل حديثاً
عامل التصفية النشط
- جديد
- غير متوفر حالياً
XTool
xTool F1 Ultra 20W Laser Engraver
- xTool F1 Ultra 20W Laser Engraving Machine
- 20W Fiber & 20W Diode Dual Laser
- Almost All Materials Applicable
- Large Working Area 220*220mm
- Expandable Working Area With Conveyor
- Fully Enclosed Safe Cover
- Easy to Use With 16Mp Smart Camera
- Auto Streamline Production
- Cut up to 0.4mm brass sheet & 15mm Wood
- Color engraving on metal
- Compatible With Lightburn , XCS Software
14,450.00 د.إ.
- جديد
- غير متوفر حالياً
AESUB
AESUB Transparent 3D Scanning Spray
- AESUB Transparent 3D Scanning Spray
- Layer thickness: 15-20 μm
- Scanning time: approx. 1-2 h
- Sublimation time: approx. 4 h
- Eliminates reflections without loss of colour information
- Thin and homogeneous coating
- Transparent vanishing dulling spray
299.00 د.إ.
- جديد
- غير متوفر حالياً
AESUB
AESUB Orange 3D Scanning Spray
- AESUB Orange 3D Scanning Spray
- Layer thickness: 2-6 μm
- Scanning time: approx. 4-8 h
- Sublimation time: approx. 12-24 h
- White coating
- No cleaning required
- Thin and homogeneous coating
- Developed and approved by scanning experts
299.00 د.إ.
- جديد
- غير متوفر حالياً
AESUB
AESUB BLUE 3D Scanning Spray
- AESUB BLUE 3D Scanning Spray
- Layer thickness: 8-15 μm
- Vanishing Scanningspray
- 100% Scanable
- White coating
- Scanning time: approx. 1-2 h
- Sublimation time: approx. 4 h
- Developed and approved by scanning experts
299.00 د.إ.
- جديد
- غير متوفر حالياً
Jamg HE
JAMG HE High Temperature Resistance Resin
- JAMG HE High Temperature Resistance Resin
- Super Hardness(Shore D): 88D
- Anti- High temperature 220°C
- Compatible With 405nm Resin 3D Printers
315.00 د.إ.
- جديد
- غير متوفر حالياً
Jamg HE
JAMG HE X Cast Resin
- JAMG HE X Cast Resin
- Sutible for jewelry or silver & gold casting
- High detail prints
- Easy cleaning
- Super casting
- Easy to set diamond or stone
- Weight 1000g
650.00 د.إ.
- جديد
- غير متوفر حالياً
Jamg HE
JAMG HE Ultra Cast Resin
- JAMG HE Ultra Cast Resin
- Easy printing
- 90% wax resin
- Extremely easy casting
- No casting skill required
555.00 د.إ.
- جديد
- غير متوفر حالياً
Jamg HE
JAMG HE Water Washable ABS Like Resin
- JAMG HE Water Washable ABS Like Resin
- Fast Curing
- Good Process Performance
- Low Viscosity
- Advantage of improved formulation
- Low Odour And Easy to Clean
0.00 د.إ.
- جديد
- غير متوفر حالياً
SOVOL
Sovol SV08
- Sovol SV08 3D Printer
- Fast & Affordable Voron 2.4 Alternative
- Printing Speed Up to 700mm/s
- Build Volume 350x350x345mm
- 4 Independent Z Motors
- Quad-Gantry-Leveling
- All-axes Linear Rails
- Built-in Camera
- Maximum Bed Temp 100
- Maximum Nozzle Temp 300
- 5" Touch Screen Control Panel
3,500.00 د.إ.
- جديد
- غير متوفر حالياً
SOVOL
Sovol Comgrow T500
- Sovol Comgrow T500 3D printer
- Full Metal Aluminum Alloy Frame
- Build Volume 500*500*500mm
- Print Speed up to 500mm/s
- Maximum Nozzle Temp 300℃
- Maximum Build Plate Temp 80℃
- Linear Rails On XYZ Axis For Enhanced Stability
- Klipper Firmware Installed
- high-precision stepper motor system
- Impeccable 49-point leveling precision
3,900.00 د.إ.
- جديد
- غير متوفر حالياً
SOVOL
Sovol Comgrow T300
- Sovol Comgrow T300 3D Printer
- Build Volume 300*300*350mm
- Printing Speed Up to 600mm/s
- Intelligent Core Based on Klipper
- All metal structure
- Reliable Filament Extrusion
- Nozzle Tempreture Up to 300℃
- Build Plate Tempreture Up to 100℃
- Layer Height 0.08-0.36mm
- Auto Bed Leveling
2,500.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyLite Dual Silk PLA
- PolyLite Dual Silk PLA Filament
- Density 1.17 g/cm3
- Tensile strength 46.6 ± 0.9 MPa
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- printing speed 40-60mm/s
99.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyLite PLA
- Polymaker PolyLite PLA Filament
- Density 1.17 g/cm3
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Tensile strength 46.6 ± 0.9 MPa
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- Printing speed 40-60mm/s
60.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyFlex TPU90
- Polymaker PolyFlex TPU90
- Created from Covestro’s Addigy
- Density 1.12 g/cm3
- Tensile strength 30.0 ± 0.66 MPa
- Elongation at break 528 586.8 ± 15.3 %
- Shore hardness 90A
- Nozzle temperature 210 – 230℃
- Build plate temperature 25~60℃
110.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolyLite ASA
- Polymaker PolyLite ASA Filament
- Weather Resistance
- UV Resistance
- Density 1.13 g/cm3
- Weak Acids Resistant
- Charpy impact strength 10.3±0.4 kJ/m2
- Elongation at break 6.7±0.6%
- Nozzle Temperature 240–260℃
- Build plate temperature 75-95˚C
95.00 د.إ.
- جديد
- غير متوفر حالياً
Polymaker
Polymaker PolySonic PLA
- Polymaker PolySonic PLA
- High-speed 3D printing filament
- Nozzle Temp 210~230°C
- Bed Temp 30~60°C
- Printing Speed up to 300mm/s
- Density 1.23 g/cm3
- Glass transition temperature 59°C
59.00 د.إ.
